| 전자부품 데이터시트 검색엔진 |
|
PHH223HMP4680ME4 데이터시트(PDF) 2 Page - Kemet Corporation |
|
|
|||||||||||||||||||||||||||||
PHH223HMP4680ME4 데이터시트(HTML) 2 Page - Kemet Corporation |
|
2 / 9 page ![]() 2 © KEMET Electronics Corporation • One East Broward Boulevard A4123_PHH223 • 6/18/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Hybrid Radial Crown Capacitors – PHH223, +125°C, Hybrid Radial Crown, UL ESR, AEC-Q200 Performance Characteristics Item Performance Characteristics Capacitance Range 540 – 8700 μF Rated Voltage 25 - 63 VDC Operating Temperature −40 to +125°C Capacitance Tolerance −20/+20%, at 100 Hz/+20°C Operational Lifetime Rated Voltage and I RAC at Tcase 90°C/100kHz (hours) Rated Voltage and I RAC at Tcase 105°C/100kHz Rated Voltage and I RAC at Tcase 125°C/100kHz (hours) ≥ 3,000 ≥ 2,000 End of Life Requirement ∆ C/C < ±30%, ESR < 3 x initial ESR value, IL < initial specified limit Surge Voltage 1.15 x V R High Temperature Storage After storage for 1,000 hours at +125°C with no voltage applied and then being stabilized at +20°C, capacitors shall meet the limits specified in Endurance. Leakage Current I = 0.005 CV (μA) C = rated capacitance (μF), V = rated voltage (VDC). Voltage applied for 5 minutes at +20°C. Vibration Test Specifications Procedure Requirements 1.5 mm displacement amplitude or 20 g maximum acceleration. Vibration applied for three 22-hour sessions at 10 – 2,000 Hz (capacitor clamped by body). No leakage of electrolyte or other visible damage. Deviations in capacitance from initial measurements must not exceed: ∆ C/C < 5% Standards AEC–Q200; IEC 60384–4 long life grade 40/125/56 Compensation Factor of Ripple Current (RC) vs. Frequency Frequency 0.1 kHz 0.2 kHz 1 kHz 5 kHz 10 kHz 20 kHz 40 kHz 100 kHz Coefficient 0.20 0.30 0.55 0.85 0.90 0.95 1 1 Test Method & Performance Endurance Life Test Conditions Performance Temperature +125°C Test Duration 2,000 hours Voltage The sum of DC voltage must not exceed the rated voltage of the capacitor Performance The following specifications will be satisfied when the capacitor is tested at +20°C: Capacitance Change Within 15% of initial value (within 10% at 1,000 hour test) Equivalent Series Resistance ≤ 1.5x specified limit (ESR measured at 100 kHz +20°C) Leakage Current Does not exceed leakage current limit |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |