PS700 datasheet(24/38 Pages) MICROCHIP

24 / 38 page

PS700

DS21760F-page 24

 2004 Microchip Technology Inc.

4.4.15

TPV – TRIP POINT VALUE

REGISTERS

There are 5 registers that are utilized to set up Trip

Point Values. These registers are used when enabled

by the TRIPctrl register to enter or exit various power

modes. Three of these Trip Point Value registers con-

tain voltage values and two contain current values. The

Trip Point Value registers, their corresponding Com-

pare registers and their enable locations are listed

below:

VPtrip, VCtrip and SHtrip are used as voltage values to

be compared to VPres, VC1res or VC2res and VPres,

respectively, for transition in and out of various power

modes. I+trip and I-trip are used as current values to be

compared to Ires for transition in and out of various

power modes. The format for data in these registers is

left justified. For the purpose of this trip point, only

magnitude is compared, the sign is ignored.

TPV: TRIP POINT VALUE REGISTERS

TPV

Location

(HEX)

Comparison

Enable

Bit

I+trip

Ires

Iex

I-trip

Ires

Ient

VPtrip

VPres

VPex

VCtrip

VC1res or

VC2res

VC1ent or

VC2ent

SHtrip

VPres

SHent

Sign

Magnitude

bit 15

bit 0

PS700 데이터시트(PDF) 24 Page - Microchip Technology

PS700 데이터시트(HTML) 24 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

데이터시트 다운로드

링크 URL