REV. 0

AD1981BL

–21–

PRO

Professional. 1 indicates professional use of channel status.

0 indicates consumer.

AUD

Non-Audio. 1 indicates data is non-PCM format.

0 data is PCM.

COPY

Copyright. 1 indicates copyright is asserted.

0 copyright is not asserted.

PRE

Pre-Emphasis. 1 indicates filter pre-emphasis is 50

µs/15 µs.

0 pre-emphasis is none.

CC[6:0]

Category Code. Programmed according to IEC standards, or as appropriate.

LGeneration Level. Programmed according to IEC standards, or as appropriate.

SPSR[1:0]

SPDIF Transmit Sample Rate.

SPSR[1:0] = 00 Transmit sample rate = 44.1 kHz.

SPSR[1:0] = 01 Reserved.

SPSR[1:0] = 10 Transmit sample rate = 48 kHz (reset default).

SPSR[1:0] = 11 Not supported.

VValidity. This bit affects the validity flag (Bit 28 transmitted in each SPDIF L/R subframe) and enables the

SPDIF transmitter to maintain connection during error or mute conditions.

V = 1 Each SPDIF subframe (L + R) has Bit 28 set to 1. This tags both samples as invalid.

V = 0 Each SPDIF subframe (L + R) has Bit 28 set to 0 for valid data and 1 for invalid data (error condition).

Note that when V = 0, asserting the VFORCE bit (D15) in Register 2Ah (Ext’d Audio Stat/Ctrl) will force the

Validity flag low, marking both samples as valid.

SPDIF Control Register (Index 3Ah)

Reg

No.

Name

D15

D14

D13

D12

D11

D10

D9

D8

D7

D6

D5

D4

D3

D2

D1

D0

Default

3Ah SPDIF

V

X

SPSR1

SPSR0

L

CC6

CC5

CC4

CC3

CC2

CC1

CC0

PRE

COPY

AUD

PRO

2000h

Control

Register 3Ah is a read/write register that controls SPDIF functionality and manages bit fields propagated as channel status (or subframe in the V case). With the

exception of V, this register should be written to only when the SPDIF transmitter is disabled (SPDIF bit in Register 2Ah is 0). This ensures that control and status

information start up correctly at the beginning of SPDIF transmission.