 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
STMPE2401TBR 데이터시트(PDF) 39 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STMPE2401TBR 데이터시트(HTML) 39 Page - STMicroelectronics |
|
|
39 / 55 page  STMPE2401 PWM commands 39/55 In order to enable a PWM channel, the programming sequence below should be observed. ● The ENx of the PWMCS register should be kept in ‘0’. By default, it has a value of ‘0’. ● Loads the instructions into the PWM channel x by writing the corresponding PWMICx. ● The PWM channel x has a 64-word depth (16-bit width). Any instructions of size less than or equal to 64 words can be loaded into the channel. Any attempt to load beyond 64 words will result in internal address pointer to roll-over (0x1f ◊ 0x00) and the excess instructions to be over-written into the first address location of the channel and onwards. ● After the instructions are loaded in, then, the PWM channel x can be enabled by setting a ‘1’ to the ENx bit. ● Enables the corresponding interrupt mask bit to allow interruption to the host. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
