direction. The TFT driver (ST7789) is very similar to the popular ST7735, and

our Arduino library supports it well.

Our breakout has the TFT display soldered on (it uses a delicate flex-circuit

connector) as well as a ultra-low-dropout 3.3V regulator and a 3/5V level

shifter so you can use it with 3.3V or 5V power and logic. We also had a little

space so we placed a microSD card holder so you can easily load full color

bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not

included, but you can pick one up here.

Of course, we wouldn't just leave you with a datasheet and a "good luck!"

- we've written a full open source graphics library that can draw pixels, lines,

rectangles, circles, text and bitmaps as well as example code and a wiring

Specifications:



1.3" LCD TFT display



Built-in microSD slot



1x16 header for easy breadboarding



4 x 0.1" / 2.5mm mounting holes in corners



LCD screen dimensions: 26mm x 26mm / 1.02" x 1.02"



Overall dimension: 35.8mm x 35.8mm x 5.3mm



Mounting hole distance: 33mm x 30mm / 1.3" x 1.2"



Weight (assembled): 7.6g

https://www.adafruit.com/product/4313/7‐26‐19