AD-ICD

3 Connecting to the application board

9/15

3.2

Connection for SO8 microcontroller package

1.

Solder the SO8 connector (8-pin header) onto your application board in place of your

microcontroller.

2.

Plug the ICC cable from the in-circuit debugging tool into the 10-pin ICC connector on

the top of the ICD Adapter (MB509).

3.

Align the pin 1 indicator on the ICD Adapter (MB509) with the pin 1 indicator for the

SO8 connector on your application board and insert the pins into the 8-pin connector

on the bottom of the ICD Adapter.

Figure 8.

SO8 connection scheme

Pin 1 indicators

ICC cable

Application board

SO8 Connector

ICD Adapter (MB509)

10-pin ICC Connector