| 전자부품 데이터시트 검색엔진 |
|
STM32WL33C8 데이터시트(PDF) 62 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32WL33C8 데이터시트(HTML) 62 Page - STMicroelectronics |
|
62 / 91 page ![]() Table 49. HSE oscillator characteristics Symbol Parameter Conditions Min. Typ. Max. Unit CHSE OSCIN OSCOUT internal capacitor - 6.7(1) 10.6(2) 14.33(3) pF CHSEstep OSCIN OSCOUT internal capacitor granularity 1-bit value VBAT = 3.3 V 27 °C, XOTUNE code between 32 and 33 - 0.12 - pF HSE start- up time Startup time for amplitude stabilization From HSE enable to amplitude ready - 155 - µs Gm Programmable trans- conductance of the oscillator at start-up ISTARTUP = 00 - 5.1 - mS ISTARTUP = 01 - 10.2 - ISTARTUP = 10 - 20.4 - 1. XOTUNE programmed at minimum code = 0 2. XOTUNE programmed at center code = 32 3. XOTUNE programmed at maximum code = 63 6.3.11 Low speed external clock The low-speed external (LSE) clock can be supplied with a 32.768 kHz crystal resonator oscillator. The information provided in this section is based on design simulation results obtained with typical external components specified in the table below. In the application, the resonator and the load capacitors have to be placed as close as possible to the oscillator pins to minimize output distortion and startup stabilization time. Refer to the crystal resonator manufacturer for more details on the resonator characteristics (frequency, package, accuracy). Table 50. Low-speed external user clock characteristics(1) Symbol Parameter Conditions Min Typ Max Unit IDD(LSE) LSE current consumption LSEDRV[1:0] =00 - Low drive capability - 250 - nA LSEDRV[1:0] =01 - Medium-low drive capability - 315 - LSEDRV[1:0] =10 - Medium-high drive capability - 500 - LSEDRV[1:0] =11 - High drive capability - 630 - Gmcritmax Maximum critical crystal gm LSEDRV[1:0] =00 - low drive capability - - 0.50 µA/V LSEDRV[1:0] =01 - medium-low drive capability - - 0.75 LSEDRV[1:0] =10 - medium-high drive capability - - 1.70 LSEDRV[1:0] =11 - high drive capability - - 2.70 tSU(LSE)(2) Startup time VDD stabilized - 2 - s 1. Guaranteed by design - not tested in production 2. tSU(LSE) is the startup time measured from the moment it is enabled (by software) until a stable 32.768 kHz oscillation is reached. This value is measured for a standard crystal and it can vary significantly with the crystal manufacturer. For more information onthe crystal selection, refer to application note Oscillator design guide for STM8AF/AL/S, STM32 MCUs and MPUs (AN2867). STM32WL33xx Electrical characteristics DS14221 - Rev 5 page 62/91 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |