STPM098C datasheet(20/110 Pages) STMICROELECTRONICS

20 / 110 page

Note:

1. OFF STATE

Internal supply and reference voltage/currents levels are degraded or shutdown.

The main logic is under reset.

All functions are disabled:

–

Input/output telemetry and monitoring units are disabled;

–

Control loop is disabled and PWMn outputs are in HIZ;

–

PMBus™ read/write operations are not available.

The device persists in this state if POR_DIG=’0’ (internal signal).

2. WAIT POR_ANA RELEASE STATE

Internal supply and reference voltage/currents levels are degraded or shutdown.

All functions are disabled:

–

Input/output telemetry and monitoring units are disabled;

–

Control loop is disabled and PWMn outputs are in HIZ;

–

PMBus™ read/write operations are not available.

The device persists in this state if POR_ANA = ’0’ (internal signal).

3. NVM DOWNLOAD STATE

Internal supply and reference voltage/currents are available possibly exceeding spec parametrical ranges.

Main functions are disabled:

–

Input/output telemetry and monitoring units are disabled;

–

Control loop is disabled and PWMn outputs are in HIZ;

–

PMBus™ read/write operations are not available.

In this mode a CRC check on NVM data is first performed:

–

If no CRC error is detected the NVM content is deployed into the main logic register and the next state

is BIST STATE;

–

If a CRC error is detected the related main logic registers are reset to default values (all ‘0’) and the

NVM_CRC_FAIL flag is set to ‘1’ and the next state is LOCKUP STATE;

–

The device persists in this state until the download procedure and CRC check process ends.

4. BIST STATE

Internal supply and reference voltage/currents are available and within spec ranges.

All functions are disabled:

–

Input/output telemetry and monitoring units are disabled;

–

Control loop is disabled and PWMn outputs are in HIZ;

–

PMBus™ read/write operations are not available.

In this mode the following mechanisms are enabled:

–

ABIST and LBIST:

◦

If it fails the next state is SAFE STATE;

◦

If it does not fail the next state is SAFE STATE;

–

MBIST:

◦

If it fails the next state is LOCKUP STATE;

◦

If it does not fail the next state is SAFE STATE;

The device persists in this state until all checks end.

5. LOCKUP STATE

All functions are disabled:

–

Input/output telemetry and monitoring units are disabled;

–

Control loop is disabled and PWMn outputs are in HIZ;

–

PMBus™ read/write operations are not available.

System reboot is needed.

6. SAFE STATE MODE

Internal supply and reference voltage/currents are available and within spec ranges.

Main functions:

–

Input/output telemetry and monitoring units is partially enabled;

–

Control loop is disabled and PWMn outputs are in HIZ;

STPM098C

Functional description

DS14440 - Rev 1

page 20/110

STPM098C 데이터시트(PDF) 20 Page - STMicroelectronics

STPM098C 데이터시트(HTML) 20 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL