6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted) (1) (2) (3)

MIN

MAX

UNIT

VDD

Supply voltage

–0.5

6

V

VSEL

Logic control input pin voltage (SELx)

–0.5

6

V

ISEL

Logic control input pin current (SELx)

–30

30

mA

VS or VD

Source or drain voltage (Sx, Dx)

–0.5

VDD+0.5

V

IS or ID (CONT)

Source or drain continuous current (Sx, Dx)

IDC ± 10 %(4)

IDC ± 10 %(4)

mA

IS or ID (PEAK)

Source and drain peak current: (1 ms period max, 10% duty cycle

maximum) (Sx, Dx)

Ipeak ± 10 %(4)

Ipeak ± 10 %(4)

mA

Tstg

Storage temperature

–65

150

°C

Ptot

Total power dissipation(5) (6)

250

mW

TJ

Junction temperature

150

°C

(1)

Stresses beyond those listed under Absolute Maximum Rating may cause permanent damage to the device. These are stress

ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated

under Recommended Operating Condition. Exposure to absolute-maximum-rated conditions for extended periods may affect device

reliability.

(2)

The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.

(3)

All voltages are with respect to ground, unless otherwise specified.

(4)

Refer to Recommended Operating Conditions for IDC and IPeak ratings.

(5)

For DBV(SOT-23) package: Ptot derates linearly above TA = 93°C by 4.45mW/°C.

(6)

For DCK(SC70) package: Ptot derates linearly above TA = 62°C by 2.87mW/°C.

6.2 ESD Ratings

VALUE

UNIT

V(ESD)

Electrostatic discharge

Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins(1)

±2000

V

Charged device model (CDM), per JEDEC specification JESD22-C101

or ANSI/ESDA/JEDEC JS-002, all pins(2)

±750

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

MIN

NOM

MAX UNIT

VDD

Supply voltage

1.08

5.5

V

VS or VD

Signal path input/output voltage (source or drain pin) (Sx, Dx)

0

VDD

V

VSEL

Logic control input pin voltage (SELx)

0

5.5

V

TA

Ambient temperature

–40

125

°C

IDC

Continuous current through switch

Tj = 25°C

150

mA

Tj = 85°C

120

mA

Tj = 125°C

60

mA

Tj = 130°C

50

mA

Ipeak

Peak current through switch(1 ms period max, 10%

duty cycle maximum)

Tj = 25°C

300

mA

Tj = 85°C

300

mA

Tj = 125°C

180

mA

Tj = 130°C

160

mA

TMUX1101, TMUX1102

SCDS410D – MARCH 2019 – REVISED FEBRUARY 2024

www.ti.com

4

Submit Document Feedback

Copyright © 2024 Texas Instruments Incorporated

Product Folder Links: TMUX1101 TMUX1102