CY8CKIT-059 datasheet(46/140 Pages) INFINEON

46 / 140 page

Document Number: 001-84932 Rev. *N

Page 45 of 139

PSoC® 5LP: CY8C58LP Family

Datasheet

7.3 UDB Array Description

Figure 7-7 shows an example of a 16 UDB array. In addition to

the array core, there are a DSI routing interfaces at the top and

bottom of the array. Other interfaces that are not explicitly shown

include the system interfaces for bus and clock distribution. The

UDB array includes multiple horizontal and vertical routing

channels each comprised of 96 wires. The wire connections to

UDBs, at horizontal/vertical intersection and at the DSI interface

are highly permutable providing efficient automatic routing in

PSoC Creator. Additionally the routing allows wire by wire

segmentation along the vertical and horizontal routing to further

increase routing flexibility and capability.

Figure 7-7. Digital System Interface Structure

7.3.1 UDB Array Programmable Resources

Figure 7-8 shows an example of how functions are mapped into

a bank of 16 UDBs. The primary programmable resources of the

UDB are two PLDs, one datapath and one status/control register.

These resources are allocated independently, because they

have independently selectable clocks, and therefore unused

blocks are allocated to other unrelated functions.

An example of this is the 8-bit Timer in the upper left corner of

the array. This function only requires one datapath in the UDB,

and therefore the PLD resources may be allocated to another

function. A function such as a Quadrature Decoder may require

more PLD logic than one UDB can supply and in this case can

utilize the unused PLD blocks in the 8-bit Timer UDB.

Programmable resources in the UDB array are generally

homogeneous so functions can be mapped to arbitrary

boundaries in the array.

Figure 7-8. Function Mapping Example in a Bank of UDBs

7.4 DSI Routing Interface Description

The DSI routing interface is a continuation of the horizontal and

vertical routing channels at the top and bottom of the UDB array

core. It provides general purpose programmable routing

between device peripherals, including UDBs, I/Os, analog

peripherals, interrupts, DMA and fixed function peripherals.

Figure 7-9 illustrates the concept of the digital system

interconnect, which connects the UDB array routing matrix with

other device peripherals. Any digital core or fixed function

peripheral that needs programmable routing is connected to this

interface.

Signals in this category include:



Interrupt requests from all digital peripherals in the system.



DMA requests from all digital peripherals in the system.



Digital peripheral data signals that need flexible routing to I/Os.



Digital peripheral data signals that need connections to UDBs.



Connections to the interrupt and DMA controllers.



Connection to I/O pins.



Connection to analog system digital signals.

UDB

System Connections

UDB

UART

Logic

12-Bit PWM

I2C Slave

8-Bit SPI

12-Bit SPI

Logic

8-Bit

Timer

16-Bit PYRS

UDB

8-Bit

Timer

Quadrature Decoder

16-Bit

PWM

CY8CKIT-059 데이터시트(PDF) 46 Page - Infineon Technologies AG

CY8CKIT-059 데이터시트(HTML) 46 Page - Infineon Technologies AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL