| 전자부품 데이터시트 검색엔진 |
|
DM505LRBABF 데이터시트(PDF) 77 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
DM505LRBABF 데이터시트(HTML) 77 Page - Texas Instruments |
|
77 / 295 page ![]() 77 DM505 www.ti.com SPRS976E – NOVEMBER 2016 – REVISED MAY 2018 Submit Documentation Feedback Specifications Copyright © 2016–2018, Texas Instruments Incorporated 5.1 Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted) PARAMETER(3) MIN MAX UNIT VSUPPLY (Steady-State) Supply Voltage Ranges (Steady- State) Core (vdd, vdd_dspeve) -0.3 1.5 V Analog (vdda_per, vdda_ddr_dsp, vdda_gmac_core, vdda_osc, vdda_csi, vdda_dac, vdda_adc) -0.3 2.0 V vdds_ddr1, vdds_ddr2, vdds_ddr3 (1.35V mode) -0.3 1.65 V vdds_ddr1, vdds_ddr2, vdds_ddr3 (1.5V mode) -0.3 1.8 V vdds_ddr1, vdds_ddr2, vdds_ddr3 (1.8V mode) -0.3 2.1 V vdds18v, vdds18v_ddr1, vdds18v_ddr2, vdds18v_ddr3 -0.3 2.1 V vddshv1-6 (1.8V mode) -0.3 2.1 V vddshv1-6 (3.3V mode) -0.3 3.8 V VIO (Steady-State) Input and Output Voltage Ranges (Steady-State) Core I/Os -0.3 1.5 V Analog I/Os -0.3 2.0 V I/O 1.35V -0.3 1.65 V I/O 1.5V -0.3 1.8 V 1.8V I/Os -0.3 2.1 V 3.3V I/Os -0.3 3.8 V SR Maximum slew rate, all supplies 105 V/s VIO (Transient Overshoot / Undershoot) Input and Output Voltage Ranges (Transient Overshoot / Undershoot) Note: valid for up to 20% of the signal period 0.2×VDD (4) V TJ Operating junction temperature range Automotive -40 +125 °C TSTG Storage temperature range after soldered onto PC Board -55 +150 °C Latch-up I-Test I-test(5), All I/Os (if different levels then one line per level) -100 100 mA Latch-up OV-Test Over-voltage Test(6), All supplies (if different levels then one line per level) N/A 1.5×Vsup ply max V (1) Stresses beyond those listed as absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those listed under Section 5.4, Recommended Operating Conditions, is not implied. Exposure to absolute maximum rated conditions for extended periods may affect device reliability. (2) All voltage values are with respect to VSS, unless otherwise noted. (3) See I/Os supplied by this power pin in Table 4-1 Ball Characteristics. (4) VDD is the voltage on the corresponding power-supply pin(s) for the IO. (5) Per JEDEC JESD78 at 125°C with specified I/O pin injection current and clamp voltage of 1.5 times maximum recommended I/O voltage and negative 0.5 times maximum recommended I/O voltage. (6) Per JEDEC JESD78 at 125°C. 5.2 ESD Ratings VALUE UNIT VESD Electrostatic discharge Human-Body model (HBM), per AEC Q100-002(1) ±1000 V Charged-device model (CDM), per AEC Q100-011 All pins ±250 Corner pins (A1, AB1, A22, AB22) ±750 (1) AEC Q100-002 indicates that HBM stressing shall be in accordance with the ANSI/ESDA/JEDEC JS-001 specification. 5.3 Power on Hour (POH) Limits IP Duty Cycle Voltage Domain Voltage (V) (max) Frequency (MHz) (max) Tj(°C) POH All 100% All All Support OPPs Automotive Profile(1) 20000 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |