AOZ8000CI datasheet(4/4 Pages) AOSMD

4 / 4 page

V. Reliability Evaluation

A. Failure Rate Prediction

FIT rate (per billion): see note 1

MTBF = see note 1

1 The presentation of FIT rate for the individual product reliability is restricted by the limited burn-in sample

size of AOZ8000CI. The calculation will be presented (using the method discussed below) on the

final qualification report when more data are available.

AOS uses industry standard techniques (JEDEC Standard JESD 85) for failure rate prediction by

applying the Arrhenius equation with an activation energy of 0.7eV and 60% of upper confidence level

on the failure rate calculation. FIT means one failure per billion hours.

The failure rate and MTBF are calculated as follows:

= exp{(Ea/k) x [1/T0-1/Ts]}

Looking up the χ

2 /2 table (see above) for zero failure (see HTOL result above) with 60% confidence, the

value of (χ

2[CL,(2f+2)] /2) is 0.92.

Failure Rate

= Chi2 [CL, (2f+2)] x 10

/ [

2 (ss) (t) (AF)]

MTBF = 10

9 / FIT

Chi² (

)

= Chi Squared Distribution, determined by the number of failures and confidence interval

= Total Number of units from HTOL testing

= Duration of HTOL testing

= Acceleration Factor from Test to Use Conditions (Ea = 0.7eV and Tuse = 55°C)

Acceleration Factor [AF] = exp [Ea / k (1/Tj u – 1/Tj s)]

Tj s

= Stressed junction temperature in degree (Kelvin), K = C+273

Tj u

= Used junction temperature in degree (Kelvin), K = C+273

= Boltznan’s constant, 8.617x10

-5 V / K

B. Package Qualification Testing

Package qual. testing are performed (see section IV) to ensure the product meet AOS quality and reliability

standards.

VI. Quality Assurance Information

Acceptable Quality Level for outgoing inspection: 0.1% for electrical and visual. Guaranteed

Outgoing Defect Rate: < 50 ppm

Quality Sample Plan: conform to Mil-Std-105D

AOZ8000CI 데이터시트(PDF) 4 Page - Alpha & Omega Semiconductors

AOZ8000CI 데이터시트(HTML) 4 Page - Alpha & Omega Semiconductors

Html Pages

1 2 3 4

데이터시트 다운로드

링크 URL