PM6670 datasheet(45/53 Pages) STMICROELECTRONICS

45 / 53 page

PM6670

Application information

45/53

Tested low-side MOSFETs are listed in Table 16.

Dual N-MOS can be used in applications with lower output current.

Table 18

shows some suitable dual MOSFETs for applications requiring about 3A.

8.1.5

Diode selection

A rectifier across the synchronous switch is recommended. The rectifier works as a voltage

clamp across the synchronous rectifier and reduces the negative inductor swing during the

dead time between turning the high-side MOSFET off and the synchronous rectifier on.

Moreover it increases the efficiency of the system.

Choose a schottky diode as long as its forward voltage drop is very little (0.3V). The reverse

voltage should be greater than the maximum input voltage VINmax and a minimum recovery

reverse charge is preferable. Table 19 shows some evaluated diodes.

Table 17. Evaluated low-side MOSFETs

Manufacturer

Type

RDSon (mΩ)

CGD \ CGS

Rated reverse voltage (V)

STS12NH3LL

13.5

0.069

STS25NH3LL

0.011

IRF7811

0.054

Table 18. Suitable dual MOSFETs

Manufacturer

Type

RDSon (mΩ)

Gate Charge (nC)

Rated reverse voltage (V)

STS8DNH3LL

IRF7313

Table 19. Evaluated recirculation rectifiers

Manufacturer

Type

Forward

voltage (V)

Rated reverse

voltage (V)

Reverse current (

µA)

STPS1L30M

0.34

0.00039

STPS1L30A

0.34

0.00039

PM6670 데이터시트(PDF) 45 Page - STMicroelectronics

PM6670 데이터시트(HTML) 45 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

데이터시트 다운로드

링크 URL