GS-BT2416C2 datasheet(18/32 Pages) STMICROELECTRONICS

부품명	GS-BT2416C2

상세설명	Bluetooth class 2 module with embedded SPP SW

PDF	32 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

18 / 32 page

AT command

GS-BT2416C2.AT1

18/32

A.5

AT command reference

AT commands are used to configure the module and trigger operations. AT commands are

transmitted over the UART channel from the external MCU to the Bluetooth module. AT

commands have the following syntax:

AT + CMD = parameter0, parameter1, …\0x0D\0x0A

AT + CMD\0x0D\0x0A

Each line must be always terminated by the 0x0D 0x0A characters and only a single

command per line is allowed.

The response to an AT command can be OK if the command was successfully executed, or

ERROR if an error occurred and has the following syntax:

\0x0D\0x0AOK\0x0D\0x0A

\0x0D\0x0AERROR\0x0D\0x0A

Some AT commands can generate events. Events are always reported as follows:

\0x0D\0x0A+EVENT: parameter0, …\0x0D\0x0A

Each event is always bounded by the characters 0x0D 0x0A and can have zero or more

parameters. The command syntax is case insensitive.

A.6

Test the UART communication channel to the Bluetooth module

Syntax: AT

Return value: OK

GS-BT2416C2 데이터시트(PDF) 18 Page - STMicroelectronics