E5CC-RX2DBM-000 datasheet(130/138 Pages) OMRON

130 / 138 page

@C/E5@C-T

130

Mounting the Terminal Cover

E5CC/E5CC-T

Slightly bend the E53-COV23 Terminal Cover to attach it to the

terminal block as shown in the following diagram. The Terminal Cover

cannot be attached in the opposite direction. E53-COV17 Terminal

Cover can be also attached.

Make sure that the "UP" mark is facing up, and then attach the E53-

COV17 Terminal Cover to the holes on the top and bottom of the

Digital Temperature Controller.

E5EC/E5AC/E5EC-T/E5AC-T

Slightly bend the E53-COV24 Terminal Cover to attach it to the

terminal block as shown in the following diagram. The Terminal Cover

cannot be attached in the opposite direction.

Attaching the End Cover

E5DC/E5DC-B

1. Install the E5DC/E5DC-B in a panel.

2. Peel off the release paper from the double-sided tape on the End

Cover.

3. Align the tabs on the End Cover with the depressions on the

E5DC/E5DC-B and attach the End Cover.

4. Secure the End Cover so that the double-sided tape is firmly

attached.

Adapter

Terminal Cover

(E53-COV17)

(Sold separately)

E53-COV17

E53-COV23

Enlarged illustration of

Terminal Section

Enlarged illustration of the terminal part

Slightly bend the

E53-COV24 Terminal

Cover in the direction

shown by the arrows to

attach it to the terminal block.

Double-sided tape

E5CC-RX2DBM-000 데이터시트(PDF) 130 Page - Omron Electronics LLC