| 전자부품 데이터시트 검색엔진 |
|
ML22Q533 데이터시트(PDF) 36 Page - Rohm |
|
|
|||||||||||||||||||||||||||||
ML22Q533 데이터시트(HTML) 36 Page - Rohm |
|
36 / 178 page ![]() FEDL22Q53X-02 ML22Q53X SPP pin and SPM pin short detection Set the SPP pin and SPM pin short detection with the SPDEN bit of the SAFE command. Detects short circuit between SPP pin and SPM pin, or SPP pin and GND (ground fault), or SPM pin and GND (ground fault). Can be used when SPVDD ≥ 4.5V. Operation is started by analog power-up in the speaker amplifier output mode by the AMODE command, and operation is terminated by power-down in the speaker amplifier output mode by the AMODE command. After inputting SAFE command, start the analog power-up operation by AMODE command within 10ms. When a short-circuit is detected, the error bit (SPDERR) is set to "1". When using a class D amplifier with the DAMP bit of AMODE command set to "1", if the PWM output is fixed to "H" level for 62.5 μs or longer, the error bit (SPDERR) is set to "1". At the same time, the speaker amplifier output pin (SPP/SPM) is forcibly turned off. Read the error bit (SPDERR) with the RDERR command, end playback, and perform analog power-down with the AMODE command. Then, use ERRCL command to clear the error bit (SPDERR). To restart playback, use the AMODE command to analog power-up the speaker amplifier output mode and enter the PLAY command. However, if shorting to ground continues, the error bit (SPDERR) is set to "1" and the speaker amplifier output pin (SPP/SPM) is forcibly turned off simultaneously. Short detection prevents damage to LSI. However, the detection circuit is effective in preventing damage due to unexpected accidents. It does not support continuous short operation or transient use. *1 Set 1 SPDEN = "1" *2 Analog power-up in speaker amplifier output mode *3 Analog power-down in speaker amplifier output mode *4 Misoperation detection and failure detection outputs are selected by OUTSTAT command. Command STATUSn *4 (n:1 or 2) SPP SPM Status SPVDD SPGND SPVDD SPGND analog power-down speaker power-down analog power-up speaker power-up HiZ SPP pin and SPM pin short detection is operating SPDERR Short detection PUP SAFE *1 AMODE *2 ERRCL AMODE *3 AMODE *2 RDERR analog power-down speaker power-down analog power-up,speaker power-up SPP pin and SPM pin short detection is operating HiZ SPDEN 10ms 36/178 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |