전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

ST72411R 데이터시트(PDF) 35 Page - STMicroelectronics

부품명 ST72411R
상세설명  8-BIT MCU WITH SMARTCARD INTERFACE, LCD DRIVER, 8-BIT TIMER, SAFE RESET AND SUPPLY MONITORING
PDF  71 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  STMICROELECTRONICS [STMicroelectronics]
홈페이지  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

ST72411R 데이터시트(HTML) 35 Page - STMicroelectronics

Back Button ST72411R Datasheet HTML 31Page - STMicroelectronics ST72411R Datasheet HTML 32Page - STMicroelectronics ST72411R Datasheet HTML 33Page - STMicroelectronics ST72411R Datasheet HTML 34Page - STMicroelectronics ST72411R Datasheet HTML 35Page - STMicroelectronics ST72411R Datasheet HTML 36Page - STMicroelectronics ST72411R Datasheet HTML 37Page - STMicroelectronics ST72411R Datasheet HTML 38Page - STMicroelectronics ST72411R Datasheet HTML 39Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 35 / 71 page
background image
ST72411R
35/71
8-BIT TIMER (Cont’d)
5.3.3 Counter/Prescaler Description
Counter
The free running 8-bit downcounter is fed by the
output of the programmable prescaler, and is dec-
remented on every rising edge of the fCOUNTER
clock signal.
It is possible to read or write the contents of the
counter on the fly, by reading or writing the timer
counter register (TCR).
When a counter underflow occurs, the counter is
automatically reloaded with the value FFh.
Counter clock and prescaler
The counter clock frequency is given by:
fCOUNTER =fTIMER /8
PS[1:0]
where fTIMER can be:
–fCPU/16
–fEXT (input on TIMIO pin)
–fCPU/16 gated by TIMIO pin
Table 13 lists the values that fCOUNTER can take if
fTIMER is fCPU/16.
Table 9. fcounter values for a fcpu=3.58MHz
The timer input clock (fTIMER) feeds the 9-bit pro-
grammable prescaler. The prescaler output can be
programmed by selecting one of the 4 available
prescaler taps using the PS[1:0] bits in the Status/
Control Register (TSCR). Thus the division factor
of the prescaler can be set to 8n (where n equals 0,
1, 2 or 3). See Figure 38.
The clock input is enabled by the PSE (Prescaler
Enable) bit in the TSCR register. When PSE is re-
set, the counter is frozen and the prescaler is load-
ed with the value 1FFh. When PSE is set, the
prescaler and the counter run at the rate of the se-
lected clock source.
Counter and Prescaler Initialization
After RESET, the counter and the prescaler are in-
itialized to FFh and 1FFh respectively.
The 9-bit prescaler can be initialized separately to
1FFh by clearing the PSE bit. Direct write access
to the prescaler is not possible.
The 8-bit counter can be initialized separately by
writing to the TCR register.
fcounter
PS0
PS1
224 kHz
0
0
28 kHz
1
0
3.5 kHz
0
1
437 Hz
1
1



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com