STULPI01ATBR datasheet(1/44 Pages) STMICROELECTRONICS

부품명	STULPI01ATBR

상세설명	High speed USB On-The-Go ULPI transceiver

PDF	44 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

1 / 44 page

June 2008

Rev 1

1/44

44

STULPI01A

STULPI01B

High speed USB On-The-Go ULPI transceiver

Features

■ USB-IF high speed certified to the Universal

Serial Bus specification Rev 2.0.

■ Meets the requirements of the Universal Serial

Bus specification revision 2.0, On-The-Go

supplement to the USB 2.0 specification 1.0a

and ULPI transceiver specification 1.1.

■ Standard ULPI (UTMI+ low pin interface) 1.1

digital interface.

■ Fully compliant with ULPI 1.1 register set.

■ External square wave clock with 1V8VIO

amplitude must be applied to oscillator input XI.

■ Supports 480 Mbit/s high speed, 12 Mbit/s full-

speed and 1.5 Mbit/s low speed modes of

operation.

■ Supports 2.7 V UART mode.

■ Supports session request protocol (SRP) and

host negotiation protocol (HNP) for dual-role

device features.

■ Ability to control external charge pump for

higher VBUS currents.

■ Single supply, +3 V to +4.5 V voltage range.

■ Integrated dual voltage regulator to supply

internal circuits with stable 3.3 V and 1.2 V.

■ Integrated over current detector.

■ Integrated HS termination and FS/LS/OTG

pull-up/pull-down resistors.

■ Integrated USB 2.0 “short-circuit withstand”

protection.

■ Power down mode with very low power

consumption for battery-powered devices.

■ Ideal for system ASICs with built-in USB host,

device or OTG cores.

■ Available in µTFBGA36 RoHS package.

■ -40 °C to 85 °C operating temperature range.

Applications

■ Mobile phones

■ PDAs

■ MP3 players

■ Digital still cameras

■ Set top box

■ Portable navigation devices

Description

The STULPI01 is a high speed USB 2.0

transceiver compliant with ULPI (UTMI+ low pin

interface) and OTG (On-The-Go) specifications,

providing a complete physical layer solution for

any high speed USB host, device or OTG dual

role core. It allows USB ASICs to interface with

the physical layer of the USB through a 12-pin

interface. It contains VBUS comparators, ID line

detector, USB differential driver and receivers and

complete ULPI register map and interrupt

generator. The STULPI01 transceiver is suitable

for mobile applications and battery powered

devices because of its low power consumption,

power down operating mode and minimal

die/package dimensions.

µTFBGA36

www.st.com

유사한 부품 번호 - STULPI01ATBR

제조업체	부품명	데이터시트	상세설명
STMicroelectronics	STULPI01ATBR	96Kb / 6P	HS USB ULPI transceiver 31-Aug-2007

More results

유사한 설명 - STULPI01ATBR

제조업체	부품명	데이터시트	상세설명
Maxim Integrated Produc...	MAX3301E	868Kb / 35P	USB On-the-Go Transceiver and Charge Pump Rev 2; 1/06
NXP Semiconductors	ISP1504A	414Kb / 84P	ULPI Hi-Speed Universal Serial Bus On-The-Go transceiver Rev. 01-19 October 2006
	ISP1506A	400Kb / 79P	ULPI Hi-Speed Universal Serial Bus On-The-Go transceiver Rev. 01 - 30 May 2007
	ISP1512A	285Kb / 56P	ULPI Hi-Speed USB transceiver Rev. 01-31 July 2008
Texas Instruments	TUSB6020	485Kb / 20P	USB 2.0 HIGH-SPEED ON-THE-GO DUAL-ROLE CONTROLLER
NXP Semiconductors	ISP1504A1	428Kb / 81P	ULPI Hi-Speed Universal Serial Bus On-The-Go transceiver Rev. 01-6 August 2007
STMicroelectronics	STULPI01A	1Mb / 44P	High-speed USB On-The-Go ULPI transceiver 07-Jun-2012
List of Unclassifed Man...	ISP1507A	1Mb / 81P	ULPI Hi-Speed USB On-The-Go transceiver
NXP Semiconductors	ISP1507ABS	424Kb / 81P	ULPI Hi-Speed Universal Serial Bus On-The-Go transceiver Rev. 01-19 May 2008
NXP Semiconductors	SAF1508BET	462Kb / 87P	ULPI Hi-Speed Universal Serial Bus On-The-Go transceiver Rev. 2-23 July 2012

More results

STULPI01ATBR 데이터시트(PDF) 1 Page - STMicroelectronics

STULPI01ATBR 데이터시트(HTML) 1 Page - STMicroelectronics

유사한 부품 번호 - STULPI01ATBR

유사한 설명 - STULPI01ATBR

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

데이터시트 다운로드

링크 URL