M41ST87Y_08 datasheet(22/48 Pages) STMICROELECTRONICS

22 / 48 page

Operating modes

M41ST87Y, M41ST87W

22/48

the output of the inverting charge pump and the VOUT of the M41ST87. The other MOSFET

should be an enhancement mode p-channel, and placed between VOUT of the M41ST87

and VCC of the external SRAM. When TPCLR goes high after a tamper condition occurs, the

n-channel MOSFET will turn on and the p-channel will turn off. During normal operating

conditions, TPCLR will be low and the p-channel will be on, while the n-channel will be off.

Table 4.

Tamper detection current (normally closed - TCMX = '0')

Figure 16.

Tamper detect sampling options

TDSX

TCHI/TCLOX

Tamper circuit mode

Current at 3.0 V (typ)(1)(2)

When calculating battery lifetime, this current should be added to IBAT current listed in Table 17 on page 42.

Per tamper detect input

Unit

Continuous monitoring / 10 M

Ω pull-up/-down

0.3

µA

Continuous monitoring / 1 M

Ω pull-up/-down

3.0

µA

Sampling (1Hz) / 10 M

Ω pull-up/-down

0.3

Sampling (1Hz) / 1 M

Ω pull-up/-down

3.0

AI07819

TAMPER LO,

NORMALLY OPEN

TAMPER HI,

NORMALLY CLOSED

User

Configuration

TDS

X = 0

TDS

X = 1

TDS

X = 0

TDS

X = 1

TAMPER HI,

NORMALLY OPEN

TAMPER LO,

NORMALLY CLOSED

CONTINUOUS

MONITORING

CONTINUOUS

MONITORING

CONTINUOUS

MONITORING

SAMPLED

MONITORING

CONTINUOUS

MONITORING

SAMPLED

MONITORING

VCC (VOUT)

TCM

X, TPMX

M41ST87Y 데이터시트(PDF) 22 Page - STMicroelectronics

M41ST87Y 데이터시트(HTML) 22 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

데이터시트 다운로드

링크 URL