7480 datasheet(18/98 Pages) RENESAS

18 / 98 page

MITSUBISHI MICROCOMPUTERS

7480/7481 GROUP

SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER

PRELIMINAR

Notice:

This

is not

a final

specification.

Some

parametric

limits

are

subject

to change.

Interrupts

Interrupts are vectored interrupts, and they can be caused by 14

different sources: 5 external sources, 8 internal sources, and 1

software source.

(1) Interrupt Control

All interrupts, except the BRK instruction interrupt, have an inter-

rupt request bit and an interrupt enable bit. Additionally, a global

interrupt disable flag affects them.

When the interrupt enable bit and the interrupt request bit are set

to "1" and the interrupt disable flag is set to "0", an interrupt is ac-

cepted.

The interrupt request bits can be cleared by the program but can-

not be set. The interrupt enable bit can be set and cleared by the

program.

The reset and BRK instruction interrupt can never be disabled.

Other interrupts are disabled when the interrupt disable flag is set.

(2) Interrupt Operation

When an interrupt request is accepted:

1. The contents of the program counter and the processor status

2. The interrupt disable flag is set and the interrupt request bit is

cleared.

3. The interrupt jump destination address is read into the program

counter.

s Notes

• When the active edge of an external interrupt (INT0, INT1,

CNTR0, CNTR1) is set, the interrupt request bit may also be set.

Therefore, disable the external interrupt and set the edge polar-

ity selection register. Then clear the interrupt request bit and

accept the external interrupt.

• Input a trigger width over 250 ns to the INT0/INT1 pin.

7480 데이터시트(PDF) 18 Page - Renesas Technology Corp

7480 데이터시트(HTML) 18 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98

데이터시트 다운로드

링크 URL