M66290AFP datasheet(40/54 Pages) RENESAS

40 / 54 page

USB DEVICE CONTROLLER

M66290AGP/FP

MITSUBISHI <DIGITAL ASSP>

Set the maximum data size (Byte) to transmit/receive in one packet

transfer.

Set the value of wMaxPacketSize in request.

When this bit is set to "1", FIFO data register becomes 8-bit mode and

when accessed "FIFO Data Register" of endpoint, lower 8bit[7:0]

becomes effective.

When transmit odd number of byte, it is needed to write in 8-bit mode.

When read in 8-bit mode, set to 8-bit mode before data receive.

When the selected endpoint is set to OUT and if this bit is set to "1",

OUT buffer effective flag and read data (number of byte) is cleared.

In this state(OUT buffer does not become effective state), SIE side

writes data from host into OUT buffer but CPU side does not read.

When set this bit to "1", whatever the transfer direction is, endpoint

buffer (all buffer of single/double buffer) are cleared.

When clear the endpoint buffer, set this bit to "1" and then set again to "0".

To set this bit as "1", Null data addition transmit mode is set .

In the endpoint which is set to continuous transmit mode, when

write a multiple data of maximum packet size into buffer and transmit,

Null data is transmitted automatically after transmitted the last packet.

This setting is effective when continuous transmit mode is set.

Set response PID.

00 : NAK

Whatever the buffer state is, do NAK handshake.

01 : BUF

Response PID is selected according to the state of buffer

and sequence toggle bit. (In bulk/interrupt transfer, one of

ACK, NAK, DATA0, and DATA1)

1x : STALL Do STALL handshake.

If the transfer direction of selected endpoint is OUT, when received

data which exceeded maximum packet size (MXPS), it becomes

"1x" (=STALL) automatically.

Bit

Name

Function

Reset

W/R

Null data

addition

transmit mode

040h

W/R

EPi_

NULMD

EPi_

ACLR

Set the access mode to endpoint buffer.

0 : CPU access mode

1 : DMA transfer mode

Max Packet size

EPi_

MXPS

[9:0]

FIFO access

8 bit mode

EPi_Octl

OUT buffer

automatic

clear mode

DMA transfer mode

EPi_

DMAMD

Response PID

EPi_

PID

[1:0]

9 to 0

15, 14

W/R

USB

S/W

H/W

NULMD

DMAMD

EPi_MXPS[9:0]

Octl

ACLR

EPi_PID[1:0]

D10

D11

D12

D15

D13

D14

(4-8) EPi Configuration Register 1 ( i=1 to 5 )

(Address : EP1=62h, EP2=66h, EP3=6Ah, EP4=6Eh, EP5=72h)

The EPi configuration register 1 must be set in a state of response PID is NAK("00").

M66290AFP 데이터시트(PDF) 40 Page - Renesas Technology Corp

M66290AFP 데이터시트(HTML) 40 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

데이터시트 다운로드

링크 URL