M16CSLASH29 datasheet(96/499 Pages) RENESAS

96 / 499 page

9. Interrupts

page 72

9.1.2 Hardware Interrupts

Hardware interrupts are classified into two types — special interrupts and peripheral function interrupts.

9.1.2.1 Special Interrupts

Special interrupts are non-maskable interrupts.

_______

9.1.2.1.1 NMI Interrupt

_______

An NMI interrupt is generated when input on the NMI pin changes state from high to low. For details

_______

about the NMI interrupt, refer to the section "NMI interrupt".

________

9.1.2.1.2 DBC Interrupt

This interrupt is exclusively for debugger, do not use in any other circumstances.

9.1.2.1.3 Watchdog Timer Interrupt

Generated by the watchdog timer. Once a watchdog timer interrupt is generated, be sure to initialize

the watchdog timer. For details about the watchdog timer, refer to the section "watchdog timer".

9.1.2.1.4 Oscillation Stop and Re-oscillation Detection Interrupt

Generated by the oscillation stop and re-oscillation detection function. For details about the oscilla-

tion stop and re-oscillation detection function, refer to the section "clock generating circuit".

9.1.2.1.5 Low Voltage Detection Interrupt

Generated by the voltage detection circuit. For details about the voltage detection circuit, refer to the

section "voltage detection circuit".

9.1.2.1.6 Single-step Interrupt

Do not normally use this interrupt because it is provided exclusively for use by development tools.

9.1.2.1.7 Address Match Interrupt

An address match interrupt is generated immediately before executing the instruction at the address

indicated by the RMAD0 or RMAD1 register, if the corresponding enable bit (AIER0 or AIER1 bit in

the AIER register) is set to 1. For details about the address match interrupt, refer to the section

“address match interrupt”.

9.1.2.2 Peripheral Function Interrupts

Peripheral function interrupts are maskable interrupts and generated by the MCU's internal functions.

The interrupt sources for peripheral function interrupts are listed in Table 9.2 Relocatable Vector

Tables. For details about the peripheral functions, refer to the description of each peripheral function

in this manual.

M16C/29 데이터시트(PDF) 96 Page - Renesas Technology Corp