H8S2245 datasheet(446/818 Pages) RENESAS

446 / 818 page

Section 12 Serial Communication Interface (SCI)

Rev.3.00 Mar. 26, 2007 Page 404 of 772

REJ09B0355-0300

• Full-duplex communication capability

 The transmitter and receiver are mutually independent, enabling transmission and reception

to be executed simultaneously

 Double-buffering is used in both the transmitter and the receiver, enabling continuous

transmission and continuous reception of serial data

• On-chip baud rate generator allows any bit rate to be selected

• Choice of LSB-first or MSB-first transfer (8 bits length)

 Can be selected regardless of the communication mode*

Note: * Descriptions in this section refer to LSB-first transfer.

• Choice of serial clock source: internal clock from baud rate generator or external clock from

SCK pin

• Four interrupt sources

 Four interrupt sources — transmit-data-empty, transmit-end, receive-data-full, and receive

error — that can issue requests independently

 The transmit-data-empty interrupt and receive data full interrupts can activate data transfer

controller (DTC) to execute data transfer

• Module stop mode can be set

 As the initial setting, SCI operation is halted. Register access is enabled by exiting module

stop mode.

H8S2245 데이터시트(PDF) 446 Page - Renesas Technology Corp