HD64F2149YV datasheet(120/1075 Pages) RENESAS

부품명	HD64F2149YV

상세설명	Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2100 Series

PDF	1075 Pages

Scroll/Zoom	100%

제조업체	RENESAS [Renesas Technology Corp]

홈페이지	http://www.renesas.com

Logo

120 / 1075 page

Section 4 Exception Handling

Rev. 3.00 Jan 18, 2006 page 92 of 1044

REJ09B0280-0300

4.1.2

Exception Handling Operation

Exceptions originate from various sources. Trap instructions and interrupts are handled as follows:

1. The program counter (PC) and condition-code register (CCR) are pushed onto the stack.

2. The interrupt mask bits are updated. The T bit is cleared to 0.

3. A vector address corresponding to the exception source is generated, and program execution

starts from that address.

For a reset exception, steps 2 and 3 above are carried out.

4.1.3

Exception Sources and Vector Table

The exception sources are classified as shown in figure 4.1. Different vector addresses are

assigned to different exception sources.

Table 4.2 lists the exception sources and their vector addresses.

Exception

sources

Reset

Trace

Interrupts

Direct transition

Trap instruction

(Cannot be used in the H8S/2169 or H8S/2149)

External interrupts: NMI, IRQ7 to IRQ0

Internal interrupts: interrupt sources in

on-chip supporting modules

Figure 4.1 Exception Sources

HD64F2149YV 데이터시트(PDF) 120 Page - Renesas Technology Corp