M32CSLASH86 datasheet(180/505 Pages) RENESAS

180 / 505 page

Page 157

15. Timer (Timer A)

)

(

Pulse width of one count source cycle

or more is required

NOTES:

1. When the rising edge of INT2 is selected.

TA3OUT

(A-phase)

Count source

TA3IN

(B-phase)

INT2 (1)

(Z-phase)

TA3OUT

(A-phase)

Count source

TA3IN

(B-phase)

Timer counter is reset

at this timing

Counter value

mm+1

INT2 (1)

(Z-phase)

NOTES:

1. When the rising edge of INT2 is selected.

15.1.2.1 Counter Reset by Two-Phase Pulse Signal Processing

Z-phase input resets the timer counter when processing a two-phase pulse signal.

This function can be used in timer A3 event counter mode, two-phase pulse signal processing, free-

_______

running count operation type or multiply-by-4 processing. The Z-phase signal is applied to the INT2 pin.

When the TAZIE bit in the ONSF register is set to "1" (Z-phase input enabled), Z-phase input can

reset the timer counter. To reset the counter by a Z-phase input, set the TA3 register to "000016"

beforehand.

_______

Z-phase input is enabled when the edge of the signal applied to the INT2 pin is detected. The POL bit

in the INT2IC register can determine edge polarity. The Z-phase must have a pulse width of one timer

A3 count source cycle or more . Figure 15.10 shows two-phase pulses (A-phase and B-phase) and

the Z-phase.

Z-phase input resets the timer counter in the next count source following Z-phase input. Figure 15.11

shows the counter reset timing.

Timer A3 interrupt request is generated twice continuously when a timer A3 overflow or underflow,

_______

and a counter reset by INT2 input occur at the same time. Do not use the timer A3 interrupt request

when this function is used.

Figure 15.10 Two-Phase Pulse (A-phase and B-phase) and Z-phase

Figure 15.11 Counter Reset Timing

M32C/86 데이터시트(PDF) 180 Page - Renesas Technology Corp

M32C/86 데이터시트(HTML) 180 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL