H83067RF datasheet(3/963 Pages) RENESAS

3 / 963 page

Rev. 4.00 Jan 26, 2006 page iii of xxii

Preface

The H8/3067 Group is a series of high-performance single-chip microcontrollers that integrate

system supporting functions together with an H8/300H CPU core.

The H8/300H CPU has a 32-bit internal architecture with sixteen 16-bit general registers, and a

concise, optimized instruction set designed for speed. It can address a 16-Mbyte linear address

space.

The on-chip supporting functions include ROM, RAM, 16-bit timers, 8-bit timers, a

programmable timing pattern controller (TPC), a watchdog timer (WDT), a serial communication

interface (SCI), an A/D converter, a D/A converter, I/O ports, a DMA controller (DMAC), and

other facilities. The three-channel SCI has been expanded to support the ISO/IEC7816-3 smart

card interface. Functions have also been added to reduce power consumption in battery-powered

applications: individual modules can be placed in standby, and the frequency of the system clock

supplied to the chip can be divided down under software control.

The address space is divided into eight areas. The data bus width and access cycle length can be

selected independently in each area, simplifying the connection of different types of memory.

Seven MCU operating modes (modes 1 to 7) are provided, offering a choice of data bus width and

address space size.

With these features, the H8/3067 Group offers easy implementation of compact, high-performance

systems.

In addition to its mask ROM versions, the H8/3067 Group has an F-ZTAT™* version with on-

chip flash memory that can be programmed on-board. This version enables users to respond

quickly and flexibly to changing application specifications.

This manual describes the H8/3067 Group hardware. For details of the instruction set, refer to the

H8/300H Series Programming Manual.

Note: * F-ZTAT™ (Flexible ZTAT) is a registered trademark of Renesas Technology Corp.

H83067RF 데이터시트(PDF) 3 Page - Renesas Technology Corp