SH7014 datasheet(37/754 Pages) RENESAS

37 / 754 page

1. SH7014/16/17 Overview

Rev.5.00 Sep. 27, 2007 Page 3 of 716

REJ09B0398-0500

• DRAM burst access function

⎯ Supports high-speed access mode for DRAM

• DRAM refresh function

⎯ Programmable refresh interval

⎯ Supports CAS-before-RAS refresh and self-refresh modes

• Wait cycles can be inserted using an external WAIT signal

• Address data multiplex I/O devices can be accessed

Note:

No bus release

Direct Memory Access Controller (DMAC) (2 Channels):

• Supports cycle-steal and burst transfers

• Supports single address mode and dual address mode transfers

• Priority order: fixed at channel 0 > channel 1

• Transfer counter: 16 bits

• Transfer request sources: external DREQ input, auto-request, and on-chip supporting modules

• Address space: 4 Gbytes

• Choice of 8-, 16-, or 32-bit transfer data size

Multifunction Timer/Pulse Unit (MTU) (3 Channels):

• Maximum 8 types of waveform output or maximum 16 types of pulse I/O processing possible

based on 16-bit timer, 3 channels

• 8 dual-use output compare/input capture registers

• 8 independent comparators

• 8 types of counter input clock

• Input capture function

• Pulse output mode

⎯ One shot, toggle, PWM

• Phase calculation mode

⎯ 2-phase encoder calculation processing

Compare Match Timer (CMT) (Two Channels):

• 16-bit free-running counter

• One compare register

• Generates an interrupt request upon compare match

SH7014 데이터시트(PDF) 37 Page - Renesas Technology Corp