전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

SH7713 데이터시트(PDF) 142 Page - Renesas Technology Corp

부품명 SH7713
상세설명  Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series
PDF  904 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  RENESAS [Renesas Technology Corp]
홈페이지  http://www.renesas.com
Logo RENESAS - Renesas Technology Corp

SH7713 데이터시트(HTML) 142 Page - Renesas Technology Corp

Back Button SH7713 Datasheet HTML 138Page - Renesas Technology Corp SH7713 Datasheet HTML 139Page - Renesas Technology Corp SH7713 Datasheet HTML 140Page - Renesas Technology Corp SH7713 Datasheet HTML 141Page - Renesas Technology Corp SH7713 Datasheet HTML 142Page - Renesas Technology Corp SH7713 Datasheet HTML 143Page - Renesas Technology Corp SH7713 Datasheet HTML 144Page - Renesas Technology Corp SH7713 Datasheet HTML 145Page - Renesas Technology Corp SH7713 Datasheet HTML 146Page - Renesas Technology Corp Next Button
Zoom Inzoom in Zoom Outzoom out
 142 / 904 page
background image
Section 3 DSP Operating Unit
Rev.1.50 Aug. 30, 2006 Page 102 of 860
REJ09B0288-0150
An example of the use of modulo addressing is shown below.
MOV.L #H’70047000,R10
;Specify MS=H’7000 ME = H’7004
LDC R10,MOD
;Specify ME:MS to MOD register
STC SR,R10
;
MOV.L #H’FFFFF3FF,R11
;
MOV.L #H’00000400,R12
;
AND R11,R10
;
OR R12,R10
;
LDC R10,SR
; Specify SR.DMX=1,
SR.DMY=0, and X modulo addressing mode
MOV.L #H’A5007000,R14
MOVX.W @R4+,X0
; R4: H’A5007000
→ H’A5007002
MOVX.W @R4+,X0
; R4: H’A5007002
→ H’A5007004
MOVX.W @R4+,X0
; R4: H’A5007004
→ H’A5007000
(Matches to ME and MS is set)
MOVX.W @R4+,X0
; R4: H’A5007000
→ H’A5007002
MOVX.W @R4+,X0
; R4: H’A5007000
→ H’A5007002
The start and end addresses are specified in MS and ME, then the DMX or DMY bit is set to 1.
When the X or Y data transfer instruction specified by the DMX or DMY is executed, the address
register contents before updating are compared with ME
*, and if they match, start address MS is
stored in the address register as the value after updating.
When the addressing type of the X/Y data transfer instruction is no-update, the X/Y data transfer
instruction is not returned to MS even if they match ME.
When the addressing type of the X/Y data transfer instruction is addition index register addressing,
the address pointed way not match the address pointer ME and exceed it. In this case, the address
pointer value does not become the modulo start address.
The maximum modulo size is 64 kbytes. This is sufficient to access the X and Y data memory.
Note: *
Not only with modulo addressing, but when X and Y data addressing is used, bit 0 is
ignored. 0 must always be written to bit 0 of the address pointer, index register, MS,
and ME.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com