| 전자부품 데이터시트 검색엔진 |
|
M38K09RFS 데이터시트(PDF) 150 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M38K09RFS 데이터시트(HTML) 150 Page - Renesas Technology Corp |
|
150 / 328 page ![]() 2.2 Interrupt Rev.2.00 Oct 05, 2006 page 21 of 111 38K0 Group REJ09B0337-0200 APPLICATION 2.2.8 Notes on interrupts (1) Change of relevant register settings When the setting of the following registers or bits is changed, the interrupt request bit may be set to “1”. When not requiring the interrupt occurrence synchronized with these setting, take the following sequence. •Interrupt edge selection register (address 0FF316) •Timer X mode register (address 2316) Set the above listed registers or bits as the following sequence. Fig. 2.2.15 Sequence of changing relevant register s Reason When setting the following, the interrupt request bit may be set to “1”. •When setting external interrupt active edge Concerned register: Interrupt edge selection register (address 0FF316) Timer X mode register (address 2316) Set the corresponding interrupt enable bit to “0” (disabled) . ↓ Set the interrupt edge select bit (active edge switch bit) or the interrupt (source) select bit to “1”. ↓ NOP (One or more instructions) ↓ Set the corresponding interrupt request bit to “0” (no interrupt request issued). ↓ Set the corresponding interrupt enable bit to “1” (enabled). |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |