CONEXTOP NEPORT User Manual
Chapter 2 Getting Started
2-1
Chapter 2 Getting Started
2.1 Hardware connection and install
Please refer to <<NePort Hardware Description>>
2.2 User Interface
The device’s configuration is stored in nonvolatile memory and is retained without power.
You can change the configuration at any time. The unit performs a reset after you change and store
the configuration.
In order to improve the flexibility and convenience, NEPORT series of products provides a
wide range of configuration tools for the user to choose, including: serial login configuration,
WEB configuration, TELNET configuration, device manager configuration.
2.2.1 Local configuration via serial port
Connect serial port to NEPORT to build the local environment:
1, connect the computer serial port with NEPORT through a standard serial cable.
2, open the terminal simulation program in the computer, such as HyperTerm (HyperTerminal)
on Windows system or Minicom on Linux system, to establish a new connection, select the actual
serial port to use, and set the serial parameters as follows(take HyperTerm as a example):
Figure 2-1 new connection of COM
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
