CONEXTOP NEPORT User Manual
Chapter 3 Parameters
3-9
3.7 Hostlist
3.7.1 Retry Settings
parameter
contents
Retry Counter
The re-connect times when the device connects the remote host
fails.
When the number of retries reached but the device still unable
to connect to the remote host, it will select other address in the
host list to connect; the above process will be repeated until a
successful connection to a host in the list of hosts.
It’s value must be within 0 to 255, 0 means no retry.
Retry Timeout
If the device connect the remote host fails, the timeout to
re-trying to connect.
Retry timeout when still can not connect to reach the remote
host, the module will select the host list of other addresses to
connect to remote host; the above process will be repeated until
a successful connection to a host in the list of hosts.
Table 3-14 retry settings
Note:
When reach retry counter or retry timeout, the device will give up retry the same host and try
another host.
3.7.2 Host Information
parameter
contents
Host Address
Host’s IP address.
Port
Host’s port number.
Backup link
Whether or not to support a backup link. If enabled, the device
will establish 2 connections and transmit data on both.
Otherwise, only one connection can be established in a time.
Table 3-15 remote host information
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
