TS2GCF133 datasheet(65/81 Pages) TRANSCEND

65 / 81 page

133X CompactFlash Card

Transcend Information Inc.

Bit 12: -XE

If set to 1, indicates that Power Level 1 commands are disabled.

If set to 0, indicates that Power Level 1 commands are enabled.

Bit 0-11: Maximum current

This field contains the CompactFlash Storage Card’s maximum current in mA.

Word 162: Key Management Schemes Supported

Bit 0: CPRM support

If set to 1, the device supports CPRM Scheme (Content Protection for Recordable Media)

If set to 0, the device does not support CPRM.

Bits 1-15 are reserved for future additional Key Management schemes.

Word 163: CF Advanced True IDE Timing Mode Capabilities and Settings

This word describes the capabilities and current settings for CFA defined advanced timing modes using

the True IDE interface.

Notice! The use of True IDE PIO Modes 5 and above or of Multiword DMA Modes 3 and above

impose significant restrictions on the implementation of the host:

Additional Requirements for CF Advanced Timing Modes.

There are four separate fields defined that describe support and selection of Advanced PIO timing modes

and Advanced Multiword DMA timing modes. The older modes are reported in words 63 and 64.

Word 63: Multiword DMA transfer and 6.2.1.6.19: Word 64: Advanced PIO transfer modes supported.

Bits 2-0: Advanced True IDE PIO Mode Support Indicates the maximum True IDE PIO mode supported by

the card.

Value

Maximum PIO mode timing selected

Specified in word 64

PIO Mode 5

PIO Mode 6

3-7

Reserved

Bits 5-3: Advanced True IDE Multiword DMA Mode Support Indicates the maximum True IDE Multiword

DMA mode supported by the card.

Value

Maximum Multiword DMA timing mode supported

Specified in word 63

Multiword DMA Mode 3

Multiword DMA Mode 4

3-7

Reserved

Bits 8-6: Advanced True IDE PIO Mode Selected Indicates the current True IDE PIO mode selected on the

card.

Value

Current PIO timing mode selected

Specified in word 64

PIO Mode 5

PIO Mode 6

3-7

Reserved

Bits 11-9: Advanced True IDE Multiword DMA Mode Selected Indicates the current True IDE Multiword

DMA Mode Selected on the card.

Value

Current Multiword DMA timing mode selected

Specified in word 63

Multiword DMA Mode 3

Multiword DMA Mode 4

TS2GCF133 데이터시트(PDF) 65 Page - Transcend Information. Inc.

TS2GCF133 데이터시트(HTML) 65 Page - Transcend Information. Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81

데이터시트 다운로드

링크 URL