| 전자부품 데이터시트 검색엔진 |
|
MMA8450QT 데이터시트(PDF) 27 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MMA8450QT 데이터시트(HTML) 27 Page - Freescale Semiconductor, Inc |
|
27 / 57 page ![]() Sensors 27 Freescale Semiconductor MMA8450Q 0x16: XYZ_DATA_CFG Sensor Data Configuration Register The XYZ_DATA_CFG register configures the 3-axis acceleration data and event flag generator based on the ODR. 0x17: HP_FILTER_CUTOFF High Pass Filter Register This register sets the high-pass filter cut-off frequency for the detection of instantaneous acceleration. The output of this filter is indicated by the OUT_X_DELTA, OUT_Y_DELTA, and OUT_Z_DELTA registers. The filter cut-off options change based on the data rate selected as shown in Table 19. For details of implementation on the high pass filter, refer to Freescale application note AN3918. 6.3 Portrait/ Landscape Embedded Function Registers For more details on the meaning of the different user configurable settings and for example code refer to Freescale application note AN3915. 0x18: PL_STATUS Portrait/Landscape Status Register This status register can be read to get updated information on any change in orientation by reading Bit 7, or on the specifics of the orientation by reading Bit0 to Bit 4. For further understanding of Portrait Up, Portrait Down, Landscape Left, Landscape Right, Back and Front please refer to Figure 9 SRC_DRDY Data Ready interrupt bit status Logic ‘1’ indicates that the X,Y,Z data ready interrupt is active indicating the presence of new data and/or data overrun. Otherwise if it is a logic ‘0’ the X,Y,Z interrupt is not active. This bit is asserted when the ZYXOW and/or ZYXDR is set and the interrupt has been enabled. This bit is cleared by reading the STATUS and X, Y, or Z register. 0x16 XYZ_DATA_CFG: Sensor Data Configuration Register (Read/Write) Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 FDE 0 0 0 0 ZDEFE YDEFE XDEFE Table 18. XYZ_DATA_CFG Description FDE FIFO Data Output Register Driver Enable. Default value: 0. 0: The sample data output registers store the current X, Y, & Z sample data; 1: The sample data output registers point to the previously stored X, Y, & Z samples data in the FIFO buffer. ZDEFE Data Event Flag Enable on new Z-axis data. Default value: 0 0: Event detection disabled; 1: Raise event flag on new Z-axis data YDEFE Data Event Flag Enable on new Y-axis data. Default value: 0 0: Event detection disabled; 1: Raise event flag on new Y-axis data XDEFE Data Event Flag Enable on new X-axis data. Default value: 0 0: Event detection disabled; 1: Raise event flag on new X-axis data 0x17 HP_FILTER_CUTOFF: High Pass Filter Register (Read/Write) Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 0 0 0 0 0 0 SEL1 SEL0 Table 19. HP_FILTER_CUTOFF Setting Options SEL1 SEL0 Fc (Hz) @ ODR = 400 Hz Fc (Hz) @ ODR = 200 Hz Fc (Hz) @ ODR = 100 Hz Fc (Hz) @ ODR = 50 Hz Fc (Hz) @ ODR = 12.5 Hz Fc (Hz) @ ODR = 1.563 Hz 0 0 4 2 1 0.5 0.125 0.01 0 1 2 1 0.5 0.25 0.063 0.007 1 0 1 0.5 0.25 0.125 0.031 0.004 1 1 0.5 0.25 0.125 0.062 0.016 0.002 0x18 PL_STATUS Register (Read Only) Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 NEWLP LO — LAPO[2] LAPO[1] LAPO[0] BAFRO[1] BAFRO[0] Table 17. INT_SOURCE Description |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |