| 전자부품 데이터시트 검색엔진 |
|
MMA8450QT 데이터시트(PDF) 37 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MMA8450QT 데이터시트(HTML) 37 Page - Freescale Semiconductor, Inc |
|
37 / 57 page ![]() Sensors 37 Freescale Semiconductor MMA8450Q 0x31 - 0x33: PULSE_THSX, Y, Z Pulse Threshold for X, Y & Z Registers The pulse threshold can be set separately for the X, Y and Z axes. The threshold values range from 0 to 31 counts with steps of 0.258g/LSB at a fixed 8g acceleration range, thus the minimum resolution is always fixed at 0.258g/LSB irrespective of the selected g range. The PULSE_THSX, PULSE_THSY and PULSE_THSZ registers define the threshold which is used by the system to start the pulse detection procedure. The threshold value is expressed over 5-bits as an unsigned number. 0x34: PULSE_TMLT Pulse Time Window 1 Register The bits Tmlt7 through Tmlt0 define the maximum time interval that can elapse between the start of the acceleration on the selected axis exceeding the specified threshold and the end when the acceleration on the selected axis must go below the specified threshold to be considered a valid pulse. The minimum time step for the pulse time limit is defined in Table 48. Maximum time for a given ODR is the minimum time step at the given power mode multiplied by 255. The time steps available are dependent on whether the device is in Normal Power mode or in Low Power mode. Notice in the table below that the time step is twice as long in Low Power mode. Therefore an ODR setting of 400 Hz with normal power mode would result in a maximum pulse time limit of (0.625 ms * 255) ≥ 159 ms. 0x31 PULSE_THSX Register (Read/Write) Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 0 0 0 THSX4 THSX3 THSX2 THSX1 THSX0 Table 45. PULSE_THSX Description THSX4, THSX0 Pulse Threshold on X-axis. Default value: 0_0000 0x32 PULSE_THSY Register (Read/Write) Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 0 0 0 THSY4 THSY3 THSY2 THSY1 THSY0 Table 46. PULSE_THSY Description THSY4, THSY0 Pulse Threshold on Y-axis. Default value: 0_0000 0x33 PULSE_THSZ Register (Read/Write) Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 0 0 0 THSZ4 THSZ3 THSZ2 THSZ1 THSZ0 Table 47. PULSE_THSZ Description THSZ4, THSZ0 Pulse Threshold on Z-axis. Default value: 0_0000 0x34 PULSE_TMLT Register (Read/Write) Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Tmlt7 Tmlt6 Tmlt5 Tmlt4 Tmlt3 Tmlt2 Tmlt1 Tmlt0 Table 48. Time Step for PULSE Time Limit at ODR and Power Mode Output Data Rate (Hz) Step at Normal Mode Step at Low Power Mode 400 0.625 ms 1.25 ms 200 1.25 ms 2.5 ms 100 2.5 ms 5.0 ms 50 5 ms 10 ms 12.5 5 ms 10 ms 1.56 5 ms 10 ms |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |