LIS331HH datasheet(29/37 Pages) STMICROELECTRONICS

29 / 37 page

LIS331HH

Doc ID 16366 Rev 1

29/37

This register sets the acceleration value taken as a reference for the high-pass filter output.

When filter is turned on (at least one of FDS, HPen2, or HPen1 bit is equal to ‘1’) and HPM

bits are set to “01”, filter out is generated taking this value as a reference.

7.8

STATUS_REG (27h)

7.9

OUT_X_L (28h), OUT_X_H (29)

X-axis acceleration data. The value is expressed as two’s complement.

Table 33.

REFERENCE description

Ref7 - Ref0

Reference value for high-pass filter. Default value: 00h.

Table 34.

STATUS_REG register

ZYXOR

ZOR

YOR

XOR

ZYXDA

ZDA

YDA

XDA

Table 35.

STATUS_REG description

ZYXOR

X, Y and Z axis data overrun. Default value: 0

(0: no overrun has occurred;

1: new data has overwritten the previous one before it was read)

ZOR

Z axis data overrun. Default value: 0

(0: no overrun has occurred;

1: a new data for the Z-axis has overwritten the previous one)

YOR

Y axis data overrun. Default value: 0

(0: no overrun has occurred;

1: a new data for the Y-axis has overwritten the previous one)

XOR

X axis data overrun. Default value: 0

(0: no overrun has occurred;

1: a new data for the X-axis has overwritten the previous one)

ZYXDA

X, Y and Z axis new data available. Default value: 0

(0: a new set of data is not yet available; 1: a new set of data is available)

ZDA

Z axis new data available. Default value: 0

(0: a new data for the Z-axis is not yet available;

1: a new data for the Z-axis is available)

YDA

Y axis new data available. Default value: 0

(0: a new data for the Y-axis is not yet available;

1: a new data for the Y-axis is available)

XDA

X axis new data available. Default value: 0

(0: a new data for the X-axis is not yet available;

1: a new data for the X-axis is available)

LIS331HH 데이터시트(PDF) 29 Page - STMicroelectronics

LIS331HH 데이터시트(HTML) 29 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

데이터시트 다운로드

링크 URL