TSU6111ARSVR datasheet(11/32 Pages) TI1

부품명	TSU6111ARSVR

상세설명	USB Port SP2T Switch Supports USB & UART

PDF	32 Pages

Scroll/Zoom	100%

제조업체	TI1 [Texas Instruments]

홈페이지	http://www.ti.com

Logo

11 / 32 page

TSU6111A

www.ti.com

SCDS331

– FEBRUARY 2012

Power-On Reset

When power (from 0 V) is applied to VBAT, an internal power-on reset holds the TSU6111A in a reset condition

until VBAT has reached VPOR. Once VBAT has reached VPOR, the reset condition is released, and the TSU6111A

registers and I2C state machine initialize to their default states.

After the initial power-up phase, VBAT must be lowered to below 0.2 V and then back up to the operating voltage

(VDDIO) for a power-reset cycle.

Software Reset

The TSU6111A has software reset feature.

•

Hold low both I2C_SCL and I2C_SDA for more than 30ms to reset digital logic of the TSU6111A.

After resetting the digital logic, INTB will keep low until INT_Mask bit of Control register (0x02) is cleared.

Figure 1. Software Reset

Submit Documentation Feedback

Product Folder Link(s): TSU6111A

TSU6111ARSVR 데이터시트(PDF) 11 Page - Texas Instruments