SPEAR320 datasheet(21/73 Pages) STMICROELECTRONICS

21 / 73 page

SPEAr320

Architecture overview

Doc ID 16755 Rev 5

21/73

●

Slave bulk transfer mode

●

Ignores CBUS addresses (predessor to I2C that used to share the I2C bus)

●

Transmit and receive buffers

●

Interrupt or polled-mode operation

●

Handles bit and byte waiting at all bus speeds

●

Digital filter for the received SDA and SCL lines

●

Handles component parameters for configurable software driver support

●

Supports APB data bus widths of 8, 16 and 32 bits.

3.18

UARTs

The SPEAr320 has 3 UARTs with different capabilities.

3.18.1

UART0

Main features:

●

Separate 16 x 8 (16 locations deep x 8-bit wide) transmit and 16 x 12 receive FIFOs to

reduce CPU interrupts

●

Speed up to 3 Mbps

●

Hardware and/or software flow control

●

Modem interface signals

3.18.2

UART1

Main features:

●

Separate 16 x 8 (16 location deep x 8-bit wide) transmit and 16x12 receive FIFOs to

reduce CPU interrupts

●

Speed up to 7 Mbps

●

Hardware flow control (in Small Printers and Automation Expansion modes only) and/or

software flow control

3.18.3

UART2

Main features:

●

Separate 16x8 (16 location deep x 8-bit wide) transmit and 16x12 receive FIFOs to

reduce CPU interrupts

●

Speed up to 7 Mbps

●

Software flow control

3.19

JPEG CODEC

SPEAr320 provides a JPEG CODEC with header processing (JPGC), able to decode (or

encode) image data contained in the SPEAr320 RAM, from the JPEG (or MCU) format to

the MCU (or JPEG) format.

SPEAR320 데이터시트(PDF) 21 Page - STMicroelectronics

SPEAR320 데이터시트(HTML) 21 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73

데이터시트 다운로드

링크 URL