Starter System Setup

www.ti.com

Figure 11 shows the jumper setup on Multi-Cal-Interface PCA. The Multi-Cal-Interface PCA has eight

jumpers that allow you to choose between current mode sensor modules (for example, 4 mA to 20 mA)

and voltage mode sensor modules (such as 0-V to 5-V output). Place all jumpers in the V position for

voltage mode; alternatively, place all jumpers in the I position for current mode.

Figure 11. Jumpers on Multi-Cal-Interface PCA Card

12

Multi-Cal-System Evaluation Module

SBOU087A

– August 2010 – Revised April 2011

Submit Documentation Feedback

Copyright

© 2010–2011, Texas Instruments Incorporated