AR1010-ISLASHML datasheet(23/70 Pages) MICROCHIP

부품명	AR1010-I/ML

상세설명	Resistive Touch Screen Controller

PDF	70 Pages

Scroll/Zoom	100%

제조업체	MICROCHIP [Microchip Technology]

홈페이지	http://www.microchip.com

Logo

23 / 70 page

 2009-2012 Microchip Technology Inc.

Preliminary

DS41393B-page 23

AR1000 SERIES RESISTIVE TOUCH SCREEN CONTROLLER

5.5

Command Protocol

The AR1021 controller receives commands from the

host as follows:

• The host clocks the bytes of a command to the

AR1021 controller.

• The AR1021 controller asserts the SIQ interrupt

pin high when it is ready with a response to the

command sent by the host.

• The host clocks out the bytes of the command

response from the AR1021 controller.

• The AR1021 controller clears the SIQ interrupt pin

low, after the first byte of the command response

has been clocked out by the host.

The communication protocol for the host sending the

ENABLE_TOUCH command to the AR1021 controller is

shown below in Figure 5-2.

FIGURE 5-2:

SPI TIMING DIAGRAM – COMMAND PROTOCOL (ENABLE_TOUCH)

5.6

SPI Bit Timing – General

General timing waveforms are shown below in

Figure 5-3.

FIGURE 5-3:

SPI GENERAL BIT TIMING WAVEFORM

AR1010-I/ML 데이터시트(PDF) 23 Page - Microchip Technology