Z80C30 datasheet(49/81 Pages) ZILOG

49 / 81 page

PS011706-0511

Functional Descriptions

CMOS SCC Serial Communications Controller

Product Specification

Z80C30 Timing

The SCC generates internal control signals from AS and DS that are related to PCLK.

Because PCLK has no phase relationship with AS and DS, the circuitry generating these

internal control signals must provide time for metastable conditions to disappear. This

gives rise to a recovery time related to PCLK. The recovery time applies only between bus

transactions involving the SCC. The recovery time required for proper operation is speci-

fied from the falling edge of DS in the first transaction involving the SCC to the falling

edge of DS in the second transaction involving the SCC. The timings for Z80C30 device is

described below:

• Read Cycle Timing

• Write Cycle Timing

• Interrupt Acknowledge Cycle Timing

Read Cycle Timing

Figure 24 displays the Read cycle timing. The address on AD7–AD0 and the state of CS0

and INTACK are latched by the rising edge of AS. R/W must be High to indicate a Read

cycle. CS1 must also be High for the Read cycle to occur. The data bus drivers in the SCC

are then enabled while DS is Low.

Figure 23. Interrupt Acknowledge Cycle Timing

D7–D0

INTACK

Vector

Z80C30 데이터시트(PDF) 49 Page - Zilog, Inc.