전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

STLUX385ATR 데이터시트(PDF) 31 Page - STMicroelectronics

부품명 STLUX385ATR
상세설명  Digital controller for lighting and power conversion applications
PDF  99 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  STMICROELECTRONICS [STMicroelectronics]
홈페이지  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

STLUX385ATR 데이터시트(HTML) 31 Page - STMicroelectronics

Back Button STLUX385ATR Datasheet HTML 27Page - STMicroelectronics STLUX385ATR Datasheet HTML 28Page - STMicroelectronics STLUX385ATR Datasheet HTML 29Page - STMicroelectronics STLUX385ATR Datasheet HTML 30Page - STMicroelectronics STLUX385ATR Datasheet HTML 31Page - STMicroelectronics STLUX385ATR Datasheet HTML 32Page - STMicroelectronics STLUX385ATR Datasheet HTML 33Page - STMicroelectronics STLUX385ATR Datasheet HTML 34Page - STMicroelectronics STLUX385ATR Datasheet HTML 35Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 31 / 99 page
background image
DocID024387 Rev 2
31/98
STLUX385A
I/O multifunction signal configuration
The port P0[5:3] or P0[2:0] can be configured to output one or two different SMEDs’ current
state.
5.2.3
Port P0 I/O functional multiplexing signal
Figure 7 shows an outline view of port P0 multi-function multiplexing scheme.
Figure 7. Port P0 I/O functional multiplexing scheme
Note:
Where “A/F(s) in” and “A/F(s) out” signals are defined in Section 4.2.
5.2.4
P0 programmable pull-up and speed feature
The I/O speed and pad pull-up resistance (47 k
Ω) of Port P0 may be configured through the
GPIO0 internal registers.
5.3
Port P1 I/O multifunction configuration signal
The Port1 I/O multifunction pins, similarly to Port0, can be individually configured through
the following set of registers based on the selected device configuration policy:
Cold configuration: AFR_IOMXP1 option byte register (refer to
Section 8). After reset
the P1 signals are configured in line with AFR_IOMXP1 contents.
Warm configuration: MISC_IOMXP1 miscellaneous register (refer to
Section 5.5). After
reset the P1 signals are configured as PWM output lines.
Every Port1 I/O can be configured to operate as a PWM output pin or a GPIO. Differently
from port P0s, the pins are configured as PWM output signals by default after reset.
The next table summarizes the port P1 configurations as selected by the register fields
Sel_p15…Sel_p10 which respectively control the bits [5]…[0] of port P1.
INPUT
OUTPUT
A/F(s) out
P0_IDR[5:0]
P0_ODR[5:0]
A/F IN
-MSC_IOMXP0
-AFR_IOMXP0
A/F(s) in
A/F OUT
P0[5:0]
GIPC080520131629FSR



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com