E5CN-RML-500 datasheet(22/72 Pages) OMRON

22 / 72 page

E5AN/E5EN

Specifications

Ratings

✽ A 2-level display when shipped from the factory. A 3-level display is activated if parameters are initialized. For details on the third display level,

refer to the User’s Manual, Basic Type (Cat. No. H156).

Power supply voltage

No D in model number: 100 to 240 VAC, 50/60 Hz

D in model number: 24 VAC, 50/60 Hz; 24 VDC

Operating voltage range

85% to 110% of rated supply voltage

Power

consumption

100 to 240 VAC: 10 VA

24 VAC/VDC: 5.5 VA (24 VAC)/4 W (24 VDC)

Sensor input

Models with temperature inputs

Thermocouple: K, J, T, E, L, U, N, R, S, B, W, or PL II

Platinum resistance thermometer: Pt100 or JPt100

Infrared temperature sensor: 10 to 70

°C, 60 to 120°C, 115 to 165°C, or 140 to 260°C

Voltage input: 0 to 50 mV

Models with analog inputs

Current input: 4 to 20 mA or 0 to 20 mA

Voltage input: 1 to 5 V, 0 to 5 V, or 0 to 10 V

Input impedance

Current input: 150

Ω max., Voltage input: 1 MΩ min. (Use a 1:1 connection when connecting the ES2-HB.)

Control method

ON/OFF control or 2-PID control (with auto-tuning)

Control

output

Relay output

SPST-NO, 250 VAC, 5 A (resistive load), electrical life: 100,000 operations, minimum applicable load: 5 V,

10 mA

Voltage output

(for driving SSR)

Output voltage: 12 VDC

±15% (PNP), max. load current: 40 mA,

With short-circuit protection circuit: Max. load current of 21 mA for control output 2

Current output

4 to 20 mA DC/0 to 20 mA DC, load: 600

Ω max., resolution: approx. 10,000

Long-life relay out-

put

SPST-NO, 250 VAC, 3 A (resistive load), electrical life: 1,000,000 operations, load power supply voltage: 75

to 250 VAC (DC loads cannot be connected.), minimum applicable load: 5 V, 10 mA, leakage current: 5 mA

max. (250 VAC, 60 Hz)

Auxiliary

output

Number of outputs

Output specifica-

tions

Relay output: SPST-NO, 250 VAC, 3 A (resistive load), electrical life: 100,000 operations, minimum applicable

load: 5 V, 10 mA

Event

input

Number of inputs

External contact in-

put specifications

Contact input: ON: 1 k

Ω max., OFF: 100 kΩ min.

Non-contact input: ON: Residual voltage: 1.5 V max., OFF: Leakage current: 0.1 mA max.

Current flow: Approx. 7 mA per contact

External power supply for ES1B 12 VDC

±10%, 20 mA, short-circuit protection circuit provided

Setting method

Digital setting using front panel keys

Indication method

11-segment digital display and individual indicators (7-segments displays also possible)

Character height: E5AN: PV: 15.8 mm, SV: 9.5 mm, MV: 6.8 mm; E5EN: PV: 11.8 mm, SV: 8.1 mm,

MV: 5.8 mm

Content of 3-level display: PV/SV/MV, PV/SV/multi-SP, or soak time remain

✽

Number of digits: 4 for PV, SV, and MV

Multi SP

Up to four set points (SP0 to SP3) can be saved and selected using event inputs, key operations, or serial

communications.

Bank switching

Not supported.

Other functions

Manual output, heating/cooling control, loop burnout alarm, SP ramp, other alarm functions, heater burnout

detection, 40% AT, 100% AT, MV limiter, input digital filter, self-tuning, temperature input shift, run/stop,

protection functions, control output ON/OFF counter, extraction of square root, MV change rate limit, logic

operations, PV/SV status display, simple program, automatic cooling coefficient adjustment

Ambient operating temperature

−10 to 55°C (with no condensation or icing), for 3-year warranty: −10 to 50°C

Ambient operating humidity

25% to 85%

Storage temperature

−25 to 65°C (with no condensation or icing)

E5CN-RML-500 데이터시트(PDF) 22 Page - Omron Electronics LLC

E5CN-RML-500 데이터시트(HTML) 22 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72

데이터시트 다운로드

링크 URL