PIC16F1508TESSQTO datasheet(301/384 Pages) MICROCHIP

301 / 384 page

 2011 Microchip Technology Inc.

Preliminary

DS41609A-page 301

PIC16(L)F1508/9

26.7

Falling Edge Dead Band

The falling edge dead band delays the turn-on of the

CWGxB output from when the CWGxA output is turned

off. The falling edge dead-band time starts when the

falling edge of the input source goes true. When this

happens, the CWGxA output is immediately turned off

and the falling edge dead-band delay time starts. When

the falling edge dead-band delay time is reached, the

CWGxB output is turned on.

The CWGxDBF register sets the duration of the dead-

band interval on the falling edge of the input source sig-

nal. This duration is from 0 to 64 counts of dead band.

Dead band is always counted off the edge on the input

source signal. A count of 0 (zero), indicates that no

dead band is present.

If the input source signal is not present for enough time

for the count to be completed, no output will be seen on

the respective output.

Refer to Figure 26-3 and Figure 26-4 for examples.

26.8

Dead-Band Uncertainty

When the rising and falling edges of the input source

triggers the dead-band counters, the input may be asyn-

chronous. This will create some uncertainty in the dead-

band time delay. The maximum uncertainty is equal to

one CWG clock period. Refer to Equation 26-1 for more

detail.

PIC16F1508TESSQTO 데이터시트(PDF) 301 Page - Microchip Technology