A3P030 datasheet(14/220 Pages) MICROSEMI

부품명	A3P030

상세설명	ProASIC3 Flash Family FPGAs with Optional Soft ARM Support

PDF	220 Pages

Scroll/Zoom	100%

제조업체	MICROSEMI [Microsemi Corporation]

홈페이지	http://www.microsemi.com

Logo

14 / 220 page

ProASIC3 Device Family Overview

1-8

Revision 13

4. Sort the pins as desired by clicking any of the column headers to sort the entries by that header.

Select the I/Os you wish to modify (Figure 1-4 on page 1-8).

5. Set the I/O Output State. You can set Basic I/O settings if you want to use the default I/O settings

for your pins, or use Custom I/O settings to customize the settings for each pin. Basic I/O state

settings:

1 – I/O is set to drive out logic High

0 – I/O is set to drive out logic Low

Last Known State – I/O is set to the last value that was driven out prior to entering the

programming mode, and then held at that value during programming

Z -Tristate: I/O is tristated

6. Click OK to return to the FlashPoint – Programming File Generator window.

Note: I/O States During programming are saved to the ADB and resulting programming files after

completing programming file generation.

Figure 1-4 • I/O States During Programming Window

A3P030 데이터시트(PDF) 14 Page - Microsemi Corporation