전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

AM79C984 데이터시트(PDF) 24 Page - Advanced Micro Devices

부품명 AM79C984
상세설명  enhanced Integrated Multiport Repeater (eIMR??
PDF  44 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  AMD [Advanced Micro Devices]
홈페이지  http://www.amd.com
Logo AMD - Advanced Micro Devices

AM79C984 데이터시트(HTML) 24 Page - Advanced Micro Devices

Back Button AM79C984 Datasheet HTML 20Page - Advanced Micro Devices AM79C984 Datasheet HTML 21Page - Advanced Micro Devices AM79C984 Datasheet HTML 22Page - Advanced Micro Devices AM79C984 Datasheet HTML 23Page - Advanced Micro Devices AM79C984 Datasheet HTML 24Page - Advanced Micro Devices AM79C984 Datasheet HTML 25Page - Advanced Micro Devices AM79C984 Datasheet HTML 26Page - Advanced Micro Devices AM79C984 Datasheet HTML 27Page - Advanced Micro Devices AM79C984 Datasheet HTML 28Page - Advanced Micro Devices Next Button
Zoom Inzoom in Zoom Outzoom out
 24 / 44 page
background image
P R E L I M I N A R Y
24
Am79C984A
SET (Write Commands)
Chip Programmable Option
SI Data
0000 10S0
SO Data
None
The eIMR chip programmable option can be enabled
(or disabled) by setting (or resetting) the S bit in the
command string.
S
AUI SQE Test Mask
Setting this bit allows the eIMR chip to ignore activity on
the CI signal pair, during the SQE test window, following
a transmission on the AUI port. Enabling this function
does not prevent the reporting of this condition by the
eIMR device. The two functions operate independently.
The SQE Test Window, as defined in IEEE 802.3 (Sec-
tion 7.2.2.2.4) is from 6 bit times to 34 bit times (0.6
µs
to 3.4
µs). This includes the delay introduced by a 50-
meter AUI. CI activity that occurs outside this window is
not ignored and is treated as a true collision.
Alternate AUI Partitioning Algorithm
SI Data
0001 1111
SO Data
None
Invoking this command sets the partition/reconnection
scheme for the AUI port to the alternate (transmit-only)
reconnection algorithm. To return the AUI port to the
standard (transmit or receive) reconnection algorithm,
it is necessary to reset the eIMR device. The standard
partitioning algorithm is selected on reset.
Alternate TP Partitioning Algorithm
SI Data
0001 0000
SO Data
None
Invoking this command sets the partition/reconnection
scheme for the TP ports to the alternate (transmit-only)
reconnection algorithm. To return the TP ports to the
standard (transmit or receive) reconnection algorithm,
it is necessary to reset the eIMR device. The standard
partitioning algorithm is selected on reset.
AUI Port Disable
SI
0010 1111
SO Data
None
This command disables the AUI port. Subsequently, the
eIMR chip will ignore all inputs to this port and will not
transmit a DAT or JAM pattern on the AUI port. Disabling
the AUI port also sets the partitioning state machine of
the AUI port to the idle state. Therefore, a partitioned
port can be reconnected by first disabling the AUI port
and then enabling the AUI port.
AUI Port Enable
SI
0011 1111
SO Data
None
This command enables the AUI port.
TP Port Disable
SI Data
0010 00##
SO Data
None
This command disables the TP port designated by the
two least-significant bits of the command byte. Subse-
quently, the eIMR chip will ignore all inputs to the des-
ignated port and will not transmit a DAT or JAM pattern
on that port. Disabling the TP port also sets the parti-
tioning state machine of that port to the idle state.There-
fore, a partitioned port can be reconnected by first
disabling the port and then enabling it.
TP Port Enable
SI Data
0011 00##
SO Data
None
This command enables the TP port designated by the
two least-significant bits of the command byte.
Disable Link Test Function (Per TP port)
SI Data
0100 00##
SO Data
None
This command disables the Link Test function of the TP
port designated by the two least-significant bits of the
command data. As a consequence of this, the port will
no longer be disconnected if it fails the Link Test. If a
port has the Link Test disabled, reading the Link Test
Status indicates a ‘Link Pass’.
Enable Link Test Function (Per TP port)
SI Data
0101 00##
SO Data
None
This command enables the Link Test function of the TP
port designated by the two least-significant bits of the
command data. As a consequence of this, the port is
disconnected if it fails the Link Test.
Disable Link Pulse (Per TP Port)
SI Data
0100 10##
SO Data
None
This command disables the transmission of the Link
pulse on the TP port designated by the two least-
significant bits of the command byte.
Enable Link Pulse (Per TP Port)
SI Data
0101 10##
SO Data
None
This command enables the transmission of the Link
pulse on the TP port designated by the two least-
significant bits of the command byte.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com