AD7682BCPZ datasheet(20/32 Pages) AD

20 / 32 page

AD7682/AD7689

Data Sheet

Rev. D | Page 20 of 32

Input Configurations

Figure 30 shows the different methods for configuring the analog

inputs with the configuration register, CFG[12:10]. Refer to the

Configuration Register, CFG, section for more details.

The analog inputs can be configured as

•

Figure 30A, single-ended referenced to system ground;

CFG[12:10] = 1112.

In this configuration, all inputs (IN[7:0]) have a range of

GND to VREF.

•

Figure 30B, bipolar differential with a common reference

point; COM = VREF/2; CFG[12:10] = 0102.

Unipolar differential with COM connected to a ground

sense; CFG[12:10] = 1102.

In this configuration, all inputs IN[7:0] have a range of

GND to VREF.

•

Figure 30C, bipolar differential pairs with the negative

input channel referenced to VREF/2; CFG[12:10] = 00X2.

Unipolar differential pairs with the negative input channel

referenced to a ground sense; CFG[12:10] = 10X2.

In these configurations, the positive input channels have

the range of GND to VREF. The negative input channels are

a sense referred to VREF/2 for bipolar pairs, or GND for

unipolar pairs. The positive channel is configured with

CFG[9:7]. If CFG[9:7] is even, then IN0, IN2, IN4, and IN6

are used. If CFG[9:7] is odd, then IN1, IN3, IN5, and IN7

are used, as indicated by the channels with parentheses in

Figure 30C. For example, for IN0/IN1 pairs with the

positive channel on IN0, CFG[9:7] = 0002. For IN4/IN5

pairs with the positive channel on IN5, CFG[9:7] = 1012.

Note that for the sequencer, detailed in the Channel

Sequencer section, the positive channels are always IN0,

IN2, IN4, and IN6.

•

Figure 30D, inputs configured in any of the preceding

combinations (showing that the AD7682/AD7689 can be

configured dynamically).

GND

COM

CH0+

CH3+

CH1+

CH2+

CH4+

CH5+

CH6+

CH7+

CH0+

CH3+

CH1+

CH2+

CH4+

CH5+

CH6+

CH7+

COM–

GND

COM

IN1

IN0

IN2

IN3

IN4

IN5

IN6

IN7

IN1

IN0

IN2

IN3

IN4

IN5

IN6

IN7

IN1

IN0

IN2

IN3

IN4

IN5

IN6

IN7

IN1

IN0

IN2

IN3

IN4

IN5

IN6

IN7

A—8 CHANNELS,

SINGLE ENDED

B—8 CHANNELS,

COMMON REFERNCE

GND

COM

CH0+ (–)

CH1+ (–)

CH2+ (–)

CH3+ (–)

CH0– (+)

CH1– (+)

CH0+ (–)

CH1+ (–)

CH0– (+)

CH1– (+)

CH2– (+)

CH3– (+)

C—4 CHANNELS,

DIFFERENTIAL

GND

COM

CH2+

CH3+

CH4+

CH5+

D—COMBINATION

COM–

Figure 30. Multiplexed Analog Input Configurations

Sequencer

The AD7682/AD7689 include a channel sequencer useful for

scanning channels in a repeated fashion. Refer to the Channel

Sequencer section for further details of the sequencer operation.

Source Resistance

When the source impedance of the driving circuit is low, the

AD7682/AD7689 can be driven directly. Large source imped-

ances significantly affect the ac performance, especially THD.

The dc performances are less sensitive to the input impedance.

The maximum source impedance depends on the amount of

THD that can be tolerated. The THD degrades as a function of

the source impedance and the maximum input frequency.

AD7682BCPZ 데이터시트(PDF) 20 Page - Analog Devices

AD7682BCPZ 데이터시트(HTML) 20 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

데이터시트 다운로드

링크 URL