I2CSTAT datasheet(23/210 Pages) MICROCHIP

23 / 210 page

DS70139G-page 23

dsPIC30F2011/2012/3012/3013

2.4

DSP Engine

The DSP engine consists of a high-speed 17-bit x

17-bit

multiplier,

barrel

shifter

and

40-bit

adder/subtracter (with two target accumulators, round

and saturation logic).

The DSP engine also has the capability to perform

inherent

accumulator-to-accumulator

operations,

which require no additional data. These instructions are

ADD, SUB

and NEG.

The dsPIC30F is a single-cycle instruction flow

architecture, therefore, concurrent operation of the

DSP engine with MCU instruction flow is not possible.

However, some MCU ALU and DSP engine resources

may be used concurrently by the same instruction

(e.g., ED, EDAC). See Table 2-2.

The DSP engine has several options selected through

various bits in the CPU Core Configuration register

(CORCON), which are:

Fractional or integer DSP multiply (IF).

Signed or unsigned DSP multiply (US).

Conventional or convergent rounding (RND).

Automatic saturation on/off for ACCA (SATA).

Automatic saturation on/off for ACCB (SATB).

Automatic saturation on/off for writes to data

memory (SATDW).

Accumulator

Saturation

mode

selection

(ACCSAT).

A block diagram of the DSP engine is shown in

Figure 2-2.

TABLE 2-2:

DSP INSTRUCTION

SUMMARY

Instruction

Algebraic

Operation

ACC WB?

CLR

A = 0

Yes

A = (x – y)2

EDAC

A = A + (x – y)2

MAC

A = A + (x * y)

Yes

MAC

A = A + x2

MOVSAC

No change in A

Yes

MPY

A = x • y

MPY.N

A = – x • y

MSC

A = A – x • y

Yes

Note:

For CORCON layout, see Table 3-3.

I2CSTAT 데이터시트(PDF) 23 Page - Microchip Technology

I2CSTAT 데이터시트(HTML) 23 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL