CS4294 datasheet(37/42 Pages) CIRRUS

37 / 42 page

CS4294

DS326PP4

FLT3D - Enhanced Stereo Filter

A 0.01

µF capacitor must be attached from this pin to AGND if the Enhanced Stereo function

is used.

8.4

Power Supplies

DVdd1, DVdd2 - Digital Supply Voltage

These pins provide the digital supply voltage for the AC-link section of the CS4294. These pins

may be tied to +5 V digital or to +3.3 V digital. The CS4294 and digital controller’s AC-link

should share a common digital supply.

DVss1, DVss2 - Digital Ground

These pins are the digital ground connection for the AC-link section of the CS4294. These pins

should be isolated from analog ground currents.

AVdd1, AVdd2, AVdd3, AVdd4 - Analog Supply Voltage

These pins provide the analog supply voltage for the analog and mixed signal sections of the

CS4294. These pins must be tied to +5 V analog supply. It is strongly recommended that +5 V

be generated from a voltage regulator to ensure proper supply currents and noise immunity

from the rest of the system.

AVss1, AVss2, AVss3, AVss4, AVss5 - Analog Ground

These pins are the ground connection for the analog, mixed signal, and substrate sections of the

CS4294. These pins should be isolated from digital ground currents.

CS4294 데이터시트(PDF) 37 Page - Cirrus Logic