ADC10D040CIVSSLASHNOPB datasheet(5/32 Pages) TI1

5 / 32 page

ADC10D040

www.ti.com

SNAS149G – OCT 2001 – REVISED MARCH 2013

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Absolute Maximum Ratings

(1) (2) (3)

Positive Supply Voltages

3.8V

Voltage on Any Pin

−0.3V to (VA or VD +0.3V)

Input Current at Any Pin(4)

±25 mA

Package Input Current(4)

±50 mA

Package Dissipation at TA = 25°C

See (5)

ESD Susceptibility(6)

Human Body Model

2500V

Machine Model

250V

Soldering Temperature, Infrared, 10 sec.

235°C

Storage Temperature

−65°C to +150°C

(1)

All voltages are measured with respect to GND = AGND = DGND = 0V, unless otherwise specified.

(2)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the

Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may

degrade when the device is not operated under the listed test conditions.

(3)

If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and

specifications.

(4)

When the input voltage at any pin exceeds the power supplies (VIN < GND or VIN > VA or VD), the current at that pin should be limited to

25 mA. The 50 mA maximum package input current rating limits the number of pins that can safely exceed the power supplies with an

input current of 25 mA to two.

(5)

The absolute maximum junction temperature (TJmax) for this device is 150°C. The maximum allowable power dissipation is dictated by

TJmax, the junction-to-ambient thermal resistance (θJA), and the ambient temperature (TA), and can be calculated using the formula

PDMAX = (TJmax - TA )/θJA. In the 48-pin TQFP, θJA is 76°C/W, so PDMAX = 1,645 mW at 25°C and 855 mW at the maximum

operating ambient temperature of 85°C. Note that the power dissipation of this device under normal operation will typically be about 307

mW (267 mW quiescent power + 40 mW due to 1 LVTTL load on each digital output). The values for maximum power dissipation listed

above will be reached only when the ADC10D040 is operated in a severe fault condition (e.g. when input or output pins are driven

beyond the power supply voltages, or the power supply polarity is reversed). Obviously, such conditions should always be avoided.

(6)

Human body model is 100 pF capacitor discharged through a 1.5 k

Ω resistor. Machine model is 220 pF discharged through 0Ω.

Operating Ratings

(1) (2)

Operating Temperature Range

−40°C ≤ TA ≤ +85°C

VA, VD Supply Voltage

+3.0V to +3.6V

VDR Supply Voltage

+1.5V to VD

VIN Differential Voltage Range

GAIN = Low

±VREF/2

GAIN = High

±VREF

VCM Input Common Mode Range

GAIN = Low

VREF/4 to (VA–VREF/4)

GAIN = High

VREF/2 to (VA–VREF/2)

VREF Voltage Range

0.6V to 1.8V

Digital Input Pins Voltage Range

−0.3V to (VA +0.3V)

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the

Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may

degrade when the device is not operated under the listed test conditions.

(2)

All voltages are measured with respect to GND = AGND = DGND = 0V, unless otherwise specified.

Submit Documentation Feedback

Product Folder Links: ADC10D040

ADC10D040CIVS/NOPB 데이터시트(PDF) 5 Page - Texas Instruments

ADC10D040CIVS/NOPB 데이터시트(HTML) 5 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

데이터시트 다운로드

링크 URL