STAC9708 datasheet(38/56 Pages) ETC

38 / 56 page

SigmaTel, Inc.

Preliminary

STAC9708/11

10/02/98

8. EXTENDED CODEC FUNCTIONALITY

8.1 Anti-Pop Circuitry

The STAC9708/11 provides an integrated output signal (APOP on pin 34) to aid in low-component-count anti-

pop implementations. An audible speaker "pop" can occur when the main power is applied to, or removed from,

the codec or audio output amplifier. In ac coupled systems, the speaker sided of the ac coupling capacitor is

shunted to ground through a transistor or FET; this prevents audible pops when the system is powering on and

off. A +10 uF capacitor on CAP1 provides a delay to hold-off power to the output stages on power up. A +22 uF

capacitor provides reserve power to sustain the output shunting action until the power has been fully removed on

power down.

APOP is active logic high during shunting operations; APOP is at logic low during normal

operations.

9. AC TIMING CHARACTERISTICS

(Tambient = 25 °C, AVdd = DVdd = 5.0V or 3.3V ± 5%, AVss=DVss+0V; 50pF external load)

9.1 Cold Reset

Figure 14. Cold Reset

RESET#

BIT_CLK

Tres_low

Trst2clk

Table 23. Cold Reset

PARAMETER

SYMBOL

MIN

TYP

MAX

UNITS

RESET# active low pulse width

Tres_low

1.0

RESET# inactive to BIT_CLK startup delay

Trst2clk

162.8

# denotes active low.

STAC9708 데이터시트(PDF) 38 Page - List of Unclassifed Manufacturers